Genelec Community Forum has been archived

Thank you for all the years of Community discussions and activity!

The time has come for us to retire the community forums, but we will keep everything available for reading. There is a lot of valuable content written over the years, and you'll be able to access all of that. However, no new posts can be written, or old posts modified.

If you have questions, we recommend you use the Support function on the bottom right corner to contact our Customer Support directly.

Alternatively, if you wish to engage in a community discussion with other people, there are many active forums available. There is also an active, fan managed GENELEC COMMUNITY in Facebook, and many Genelec employees are active in the discussions there.

We are sorry for any possible inconvenience this may cause you, but we hope to hear from you through the other channels mentioned above.

Genelec Support

Message Boards

phoenix connector spec for 4000 series speaker

qxa, modified 4 Years ago.

phoenix connector spec for 4000 series speaker

Youngling Posts: 1 Join Date: 6/18/19 Recent Posts

Hi, I would like to know the phoenix connector spec for 4000 series speaker, can you point me to buy a correct one? Thanks.

jani-oksanen, modified 4 Years ago.

RE: phoenix connector spec for 4000 series speaker

Jedi Master Posts: 449 Join Date: 3/30/17 Recent Posts

Welcome to our forum. There is different phoenix connectors used in different models. These connectors are available through our distributors worldwide, and I would recommend you to reach them with the exact model name of your speakers. You can find your nearest distributor from link below:
 

https://www.genelec.com/where-buy

Best Regards,
Jani Oksanen
​​​​​​​Customer Support Team

rubickon, modified 3 Years ago.

RE: phoenix connector spec for 4000 series speaker

Youngling Posts: 3 Join Date: 10/24/19 Recent Posts

thanks!!