Genelec Community Forum has been archived

Thank you for all the years of Community discussions and activity!

The time has come for us to retire the community forums, but we will keep everything available for reading. There is a lot of valuable content written over the years, and you'll be able to access all of that. However, no new posts can be written, or old posts modified.

If you have questions, we recommend you use the Support function on the bottom right corner to contact our Customer Support directly.

Alternatively, if you wish to engage in a community discussion with other people, there are many active forums available. There is also an active, fan managed GENELEC COMMUNITY in Facebook, and many Genelec employees are active in the discussions there.

We are sorry for any possible inconvenience this may cause you, but we hope to hear from you through the other channels mentioned above.

Genelec Support

Message Boards

Connecting Genelec Model: 8250A to UAD Apollo X6

blackblackstudios, modified 2 Years ago.

Connecting Genelec Model: 8250A to UAD Apollo X6

Youngling Posts: 5 Join Date: 4/14/14 Recent Posts

Hi Genelec,

We have a pair of Genelec Model: 8250As at our Studio in Dubai. We recently upgraded our Audio Interface to the UAD Apollo X6 and it has SPDIF Out. Is it recommended to use the SPDIF Out to be connected to the AES/EBU using the necessary cables ?

Will it make any difference to the overall setup and would you recommend to recalibrate using the GLM 4.0?

Regards,

Sri

lukester, modified 2 Years ago.

RE: Connecting Genelec Model: 8250A to UAD Apollo X6

Jedi Master Posts: 296 Join Date: 4/22/10 Recent Posts

Yes, use SPDIF to AES adapter.
If you used the speakers in analog mode before, you have to calibrate again if I remember correctly.
Other than that you could manually transfer the values between old and new digital GLM settings.