Genelec Community Forum has been archived

Thank you for all the years of Community discussions and activity!

The time has come for us to retire the community forums, but we will keep everything available for reading. There is a lot of valuable content written over the years, and you'll be able to access all of that. However, no new posts can be written, or old posts modified.

If you have questions, we recommend you use the Support function on the bottom right corner to contact our Customer Support directly.

Alternatively, if you wish to engage in a community discussion with other people, there are many active forums available. There is also an active, fan managed GENELEC COMMUNITY in Facebook, and many Genelec employees are active in the discussions there.

We are sorry for any possible inconvenience this may cause you, but we hope to hear from you through the other channels mentioned above.

Genelec Support

Message Boards

8430A & Dante compability

neuman, modified 6 Years ago.

8430A & Dante compability

Youngling Posts: 1 Join Date: 2/13/13 Recent Posts
If I connect a 8430A to a network where I run my Dante equipment, will it show up as a receiver?
ilkka-rissanen, modified 6 Years ago.

Re: 8430A & Dante compability

Yoda Posts: 2564 Join Date: 3/23/09 Recent Posts
Audinate has announced that their Dante systems will support AES67 interoperability. This means that 8430 can be used with Dante equipment once they are set to work in the AES67 mode. Audinate (Dante) promises are actually dual mode interface (AES67 + Dante). That means that these are interoperable after Dante has implemented AES67 to their protocol set. For those who are already using Dante, it is necessary to upgrade their system firmware to make it compatible with latest Dante implementation which can supports AES67. For more information on how to do this, please contact Audinate or the vendor of the equipment containing Dante.