Genelec Community Forum has been archived

Thank you for all the years of Community discussions and activity!

The time has come for us to retire the community forums, but we will keep everything available for reading. There is a lot of valuable content written over the years, and you'll be able to access all of that. However, no new posts can be written, or old posts modified.

If you have questions, we recommend you use the Support function on the bottom right corner to contact our Customer Support directly.

Alternatively, if you wish to engage in a community discussion with other people, there are many active forums available. There is also an active, fan managed GENELEC COMMUNITY in Facebook, and many Genelec employees are active in the discussions there.

We are sorry for any possible inconvenience this may cause you, but we hope to hear from you through the other channels mentioned above.

Genelec Support

Message Boards

8030A speakers is not switching on

samy, modified 8 Years ago.

8030A speakers is not switching on

Youngling Posts: 1 Join Date: 8/23/14 Recent Posts
Hello there

I am greatly worried my genelec 8030a is not switching on. I bought it in US and I want to use in India. Today only I started using by plugging it into 230v. Then only I realized from the back of the speaker that 110v should be used. After which I used a step down transformer to convert the voltage from 230 to 110 and Now no light is being turned on eventhough I turn on the switch. Please help.

Thanks in advance
Sam
ilkka-rissanen, modified 8 Years ago.

Re: 8030A speakers is not switching on

Yoda Posts: 2564 Join Date: 3/23/09 Recent Posts
Hi Sam,

Unfortunately the mains fuses are burnt and need to be replaced. For this you should contact your distributor and service centre in India.

Sound Team
B-2 A/3 Nalanda Usha Colony,, Ramchandra Ext. Lane, Malad, 400064 Bombay, India
T + 91 22 2881 4041
W www.soundteam.in
E shiv@soundteam.in