Genelec Community Forum has been archived

Thank you for all the years of Community discussions and activity!

The time has come for us to retire the community forums, but we will keep everything available for reading. There is a lot of valuable content written over the years, and you'll be able to access all of that. However, no new posts can be written, or old posts modified.

If you have questions, we recommend you use the Support function on the bottom right corner to contact our Customer Support directly.

Alternatively, if you wish to engage in a community discussion with other people, there are many active forums available. There is also an active, fan managed GENELEC COMMUNITY in Facebook, and many Genelec employees are active in the discussions there.

We are sorry for any possible inconvenience this may cause you, but we hope to hear from you through the other channels mentioned above.

Genelec Support

Keskusteluryhmät

M040 and 7060b placement

tim, muokattu 4 Vuodet sitten.

M040 and 7060b placement

Youngling Viestejä: 1 Liittymispäivä: 25.6.2018 Viimeisimmät viestit
Hello, I am looking for some advice on speaker placement in my mix/ production room. I have a pair of M040 speakers and a 7060b subwoofer. I am intending to have the system set up so I can listen with the sub bypassed so I can have the full range of the M040 and also with the sub active. My problem is that your speaker placement guide advises me to avoid placing my monitors more than 60cm from the front wall without a sub and conversely with a sub to avoivd less than 1.1m from the front wall. What are my options here? Any help would be greatly appreciated. Thanks.