Genelec Community Forum has been archived

Thank you for all the years of Community discussions and activity!

The time has come for us to retire the community forums, but we will keep everything available for reading. There is a lot of valuable content written over the years, and you'll be able to access all of that. However, no new posts can be written, or old posts modified.

If you have questions, we recommend you use the Support function on the bottom right corner to contact our Customer Support directly.

Alternatively, if you wish to engage in a community discussion with other people, there are many active forums available. There is also an active, fan managed GENELEC COMMUNITY in Facebook, and many Genelec employees are active in the discussions there.

We are sorry for any possible inconvenience this may cause you, but we hope to hear from you through the other channels mentioned above.

Genelec Support

Keskusteluryhmät

8040 dip switches

phye, muokattu 3 Vuodet sitten.

8040 dip switches

Youngling Viestejä: 2 Liittymispäivä: 23.6.2014 Viimeisimmät viestit

This might have been asked a thousand times but I've done some searches and just cannot find the simple answer but I might be a bit thick.

On my 8040 there are 3 sets of white switches on a red background. Corresponding to Roll off, Bass Tilt, Treble Tilt. Desktop is 4 switch of the roll off group??

In the Quick guide I see some suggested settings for different environment but still I cannot deduce which switch setting stands for which curve of the respected groups.

1 switch up the rest down? Curve 1? but there are only 4 curves and all switches down must mean neutral? or is that curve 1? 

I would love someone te explain.

jani-oksanen, muokattu 3 Vuodet sitten.

RE: 8040 dip switches

Jedi Master Viestejä: 449 Liittymispäivä: 30.3.2017 Viimeisimmät viestit

Hello,


Genelec monitors have always been individually tested and adjusted for a flat frequency response in an anechoic room before leaving the factory. When used in the real world, however, room and placement needs to be taken into account. That is why Genelecs for decades have had DIP switches. If you just leave all switches off, the monitor has a flat on-axis frequency response in an anechoic room, or standing free outside; but it most likely won't provide anywhere near a flat response when used in a room or studio. I have made this picture below to explain the meaning of each DIP-switches. I hope you find it useful!

 

Please also visit this link for more information: https://www.genelec.com/blog/frequency-response-and-personal-preference