Genelec Community Forum has been archived

Thank you for all the years of Community discussions and activity!

The time has come for us to retire the community forums, but we will keep everything available for reading. There is a lot of valuable content written over the years, and you'll be able to access all of that. However, no new posts can be written, or old posts modified.

If you have questions, we recommend you use the Support function on the bottom right corner to contact our Customer Support directly.

Alternatively, if you wish to engage in a community discussion with other people, there are many active forums available. There is also an active, fan managed GENELEC COMMUNITY in Facebook, and many Genelec employees are active in the discussions there.

We are sorry for any possible inconvenience this may cause you, but we hope to hear from you through the other channels mentioned above.

Genelec Support

Keskusteluryhmät

73x0 Subwoofer Paint name

lukester, muokattu 3 Vuodet sitten.

73x0 Subwoofer Paint name

Jedi Master Viestejä: 296 Liittymispäivä: 22.4.2010 Viimeisimmät viestit

Crap, one of my 7370s got pretty beaten up in transport.

fixing whole chassis in finland costs slightly more than a new unit ;)

 

i got the name for the color, but apparently the suppliere got bought, names changed.

old name was Becker Acroma DH997 7018, does anybody know the new name?

lukester, muokattu 3 Vuodet sitten.

RE: 73x0 Subwoofer Paint name

Jedi Master Viestejä: 296 Liittymispäivä: 22.4.2010 Viimeisimmät viestit
bump.
clearsignal, muokattu 3 Vuodet sitten.

RE: 73x0 Subwoofer Paint name

Padawan Viestejä: 50 Liittymispäivä: 2.3.2018 Viimeisimmät viestit

 

Which section is damaged? The aluminum center or the MDF sandwich?

 

You can get MDF panels from Genelec and swap them yourself.

 

If the aluminum, consider gutting out the sub and sending the parts for powder coating.

lukester, muokattu 3 Vuodet sitten.

RE: 73x0 Subwoofer Paint name

Jedi Master Viestejä: 296 Liittymispäivä: 22.4.2010 Viimeisimmät viestit

@clearsignal:

it's the front MDF that's damaged.

German Genelec Distributor told me that swapping MDF yourself is impossible for laminar spiral enclosure.

i could have imagined stabilizing the enclosure with tension belts to swap MDF, been warned not to.

do you have 1st hand experience?

 

@Jani:

RAL 9004 is called signal black, online samples look like 1031, 1237... imho.

the subs look decidedly grey to me ;)

will get 9004 and report back only in case my doubts proove valid.

 

thanx!

jani-oksanen, muokattu 3 Vuodet sitten.

RE: 73x0 Subwoofer Paint name

Jedi Master Viestejä: 449 Liittymispäivä: 30.3.2017 Viimeisimmät viestit

Hello,

Sorry for late reply! The colour code for 7300-series MDF is RAL 9004.

Best Regards,
Jani Oksanen
Customer Support Team