Genelec Community Forum has been archived

Thank you for all the years of Community discussions and activity!

The time has come for us to retire the community forums, but we will keep everything available for reading. There is a lot of valuable content written over the years, and you'll be able to access all of that. However, no new posts can be written, or old posts modified.

If you have questions, we recommend you use the Support function on the bottom right corner to contact our Customer Support directly.

Alternatively, if you wish to engage in a community discussion with other people, there are many active forums available. There is also an active, fan managed GENELEC COMMUNITY in Facebook, and many Genelec employees are active in the discussions there.

We are sorry for any possible inconvenience this may cause you, but we hope to hear from you through the other channels mentioned above.

Genelec Support

Keskusteluryhmät

Distance to 8351 and distance when mixing in general

matthew, muokattu 3 Vuodet sitten.

Distance to 8351 and distance when mixing in general

Youngling Viestejä: 11 Liittymispäivä: 12.6.2018 Viimeisimmät viestit

Hey together,

my control room is after treatment somehow forgiving and let´s me choose between two positions / distances to my pair of 8351. 

Both positions show nearly equally good mearsurement regarding the frequency response.

I can sit to them very close and space them apart around 1,2 - 1,3 meters. This would put me around 0,9 - 1 meter away from them - pretty much the setup as putting them on the meterbridge of a console.

Second position would put them around 1,8 - 1,9 meter apart. I would sit around 1,5 - 1,6 meter away from them. The frequency response is a little better in this position.

These are the only speakers in the control room.

Of course i did a little web search and looked at some pro control rooms - but you see everything :-) you even see speakers really far apart and the listening position very close to them.

The room is new to me as are the speakers - in both positions i start from the scratch to get used to the 8351.

I am spoilt for choice.

 

Are there any reasons to prefer one position over the other? 

Any advantages or disadvantages regarding mixing at these different distances?

 

I would be very happy to get some feedback from people out there that are more experienced than me!

Thanks in advance!

Matthew J