Genelec Community Forum has been archived

Thank you for all the years of Community discussions and activity!

The time has come for us to retire the community forums, but we will keep everything available for reading. There is a lot of valuable content written over the years, and you'll be able to access all of that. However, no new posts can be written, or old posts modified.

If you have questions, we recommend you use the Support function on the bottom right corner to contact our Customer Support directly.

Alternatively, if you wish to engage in a community discussion with other people, there are many active forums available. There is also an active, fan managed GENELEC COMMUNITY in Facebook, and many Genelec employees are active in the discussions there.

We are sorry for any possible inconvenience this may cause you, but we hope to hear from you through the other channels mentioned above.

Genelec Support

Keskusteluryhmät

7270A or 7350A for 8330A?

gnu-plebian, muokattu 3 Vuodet sitten.

7270A or 7350A for 8330A?

Youngling Viestejä: 2 Liittymispäivä: 9.2.2018 Viimeisimmät viestit

Greetings all, 


I have an oppertunity to buy a 7270A for a fantastic price. Would it be a good paring with the 8330As, or would the newer 7350A be better intergrated performance wise? 

Thank you!

lukester, muokattu 3 Vuodet sitten.

RE: 7270A or 7350A for 8330A?

Jedi Master Viestejä: 296 Liittymispäivä: 22.4.2010 Viimeisimmät viestit

the 7270 is digital only.

surely the better choice if the weight is not a turn-off.

but impossible to integrate in any other future context.

clearsignal, muokattu 3 Vuodet sitten.

RE: 7270A or 7350A for 8330A?

Padawan Viestejä: 50 Liittymispäivä: 2.3.2018 Viimeisimmät viestit

I don’t think being solely digital is a strike against the 7270. I’d personally only run AES with Genelec; it simply sounds better.

However, Genelec recommends matching the 8330 with the 7350, so my concern would be LF of the 7270 that overwhelms the mix. You can probably compensate with the GLM, but I don’t see the point.

If that’s of any help, I own the 7350 and 7360, which I experimentally matted with 8331 x 2 and, despite Genlec’s published recommendation, eventually opted for the smaller 7350.

 

lukester, muokattu 3 Vuodet sitten.

RE: 7270A or 7350A for 8330A? (Vastaus)

Jedi Master Viestejä: 296 Liittymispäivä: 22.4.2010 Viimeisimmät viestit

overpowering the mix isn't a problem, after calibration you'll have perfect levels.

but you'll have a sub that has way more headroom an weight than you'll ever need. unless surround.

 

gnu-plebian, muokattu 3 Vuodet sitten.

RE: 7270A or 7350A for 8330A?

Youngling Viestejä: 2 Liittymispäivä: 9.2.2018 Viimeisimmät viestit
Thanks for your replies all!