Genelec Community Forum has been archived

Thank you for all the years of Community discussions and activity!

The time has come for us to retire the community forums, but we will keep everything available for reading. There is a lot of valuable content written over the years, and you'll be able to access all of that. However, no new posts can be written, or old posts modified.

If you have questions, we recommend you use the Support function on the bottom right corner to contact our Customer Support directly.

Alternatively, if you wish to engage in a community discussion with other people, there are many active forums available. There is also an active, fan managed GENELEC COMMUNITY in Facebook, and many Genelec employees are active in the discussions there.

We are sorry for any possible inconvenience this may cause you, but we hope to hear from you through the other channels mentioned above.

Genelec Support

Keskusteluryhmät

Appropriate table stands for 8340?

191919, muokattu 3 Vuodet sitten.

Appropriate table stands for 8340?

Youngling Viestejä: 3 Liittymispäivä: 27.9.2018 Viimeisimmät viestit

Hi all,

Which are the suitable table stands (and stand plates) for the Genelec 8340 APM (SAM)?

I had a look in the Accessories Catalogue but must admit that I'm still confused about compabilities, as the naming scheme is a little obtuse. I'm sure the answer is very straight-forward and can be easily cleared up however, so thank you for that.

Having looked around, I wonder if the K&M 23310 Table Stand + Genelec Z8260-450B is the proper combination for 8340 APM?

Are the L-shaped stands also compatible in "upright" position (not lying down)?

I am looking for some stands that can raise the tweeters to ear-height on my desk. Unfortunately, it is a plain desk with no elevated parts, so if there are any table stands that are generally tall enough it would be good (I'm just slightly shorter than average height, so having measured I think about 170 mm as the K&M 23310 would be okay although maybe 190-200 mm would be better).

manutal, muokattu 3 Vuodet sitten.

RE: Appropriate table stands for 8340?

Jedi Knight Viestejä: 180 Liittymispäivä: 25.4.2014 Viimeisimmät viestit

This is the adapter plate you need: Genelec Z8040-408

Genelec Z8260-450B is for the 8260A's.

K&M 23310 Table Stand will work but it may be a little top heavy with the XX40's, those stands work best for the smaller models XX1X-XX3X.

191919, muokattu 3 Vuodet sitten.

RE: Appropriate table stands for 8340?

Youngling Viestejä: 3 Liittymispäivä: 27.9.2018 Viimeisimmät viestit
manutal:

This is the adapter plate you need: Genelec Z8040-408

Genelec Z8260-450B is for the 8260A's.

K&M 23310 Table Stand will work but it may be a little top heavy with the XX40's, those stands work best for the smaller models XX10-XX30.


Manutal, thanks for the help!

Do you know of any other table stands that willl work with XX40's, which are better suited than the K&M 23310?

Edit: I ordered for the 8340 APM, the Genelec Z8040-408 standing plate and K&M 23310 table stand. I had missed the compability chart on p. 25: https://www.genelec.com/sites/default/files/media/Studio%20monitors/Accessories/genelec-accessories-catalog-bbage045g.pdf

 It does seem to indicate that they are compatible, but I will be a little careful if they are top-heavy.

klauswerner, muokattu 3 Vuodet sitten.

RE: Appropriate table stands for 8340?

Youngling Viestejä: 7 Liittymispäivä: 13.7.2017 Viimeisimmät viestit