Genelec Community Forum has been archived

Thank you for all the years of Community discussions and activity!

The time has come for us to retire the community forums, but we will keep everything available for reading. There is a lot of valuable content written over the years, and you'll be able to access all of that. However, no new posts can be written, or old posts modified.

If you have questions, we recommend you use the Support function on the bottom right corner to contact our Customer Support directly.

Alternatively, if you wish to engage in a community discussion with other people, there are many active forums available. There is also an active, fan managed GENELEC COMMUNITY in Facebook, and many Genelec employees are active in the discussions there.

We are sorry for any possible inconvenience this may cause you, but we hope to hear from you through the other channels mentioned above.

Genelec Support


7050B subs placement

jkaven, muokattu 4 Vuodet sitten.

7050B subs placement

Youngling Viestejä: 2 Liittymispäivä: 3.5.2013 Viimeisimmät viestit


I have installation for small club where I would like to use 2 x 7050B susbs together with 4030 speakers. My question is how could I calculate an optimal locations for the subs? What should be the cap with the subs?

Rgds Jukka




lukester, muokattu 4 Vuodet sitten.

RE: 7050B subs placement

Jedi Master Viestejä: 296 Liittymispäivä: 22.4.2010 Viimeisimmät viestit

calculating is hard, nobody does that afaik.


trial and error is what most of us do.

reversing positions, putting the sub in the listening position and crawling on the floor to find  a place where it sounds good is what you do at home.


you might want put them in the corners, this will give you the most volume.


jkaven, muokattu 4 Vuodet sitten.

RE: 7050B subs placement

Youngling Viestejä: 2 Liittymispäivä: 3.5.2013 Viimeisimmät viestit

Thanks for sharing Lukestar,

The problem with my space is its L-shape and coverage should naturally be all over.

Other issue is limitation of possible places for subs as there are lots of tables, chairs etc.

Yeah I believe the best might be just trying and crawling on the floor to find the place...

costakis, muokattu 3 Vuodet sitten.

RE: 7050B subs placement

Padawan Viestejä: 76 Liittymispäivä: 13.2.2019 Viimeisimmät viestit

Dear Jukka

The closer to the wall, the better will be for the subs. In your case, since the area is L-shaped you should pay attention to the phase settings of both subs in order to avoid cancellation in level. In any way, you cannot expect miracles from such an area and definitivelly the subs from Genelex are a good choice due to their design. Yet, you should not expect extremelly high dBs. In case that you need high level, in my humble opinion, you should turn into a PA solution. 

What are the dimensions of your club?