Genelec Community Forum has been archived

Thank you for all the years of Community discussions and activity!

The time has come for us to retire the community forums, but we will keep everything available for reading. There is a lot of valuable content written over the years, and you'll be able to access all of that. However, no new posts can be written, or old posts modified.

If you have questions, we recommend you use the Support function on the bottom right corner to contact our Customer Support directly.

Alternatively, if you wish to engage in a community discussion with other people, there are many active forums available. There is also an active, fan managed GENELEC COMMUNITY in Facebook, and many Genelec employees are active in the discussions there.

We are sorry for any possible inconvenience this may cause you, but we hope to hear from you through the other channels mentioned above.

Genelec Support


4000 series, chain installation.

peicco, muokattu 4 Vuodet sitten.

4000 series, chain installation.

Youngling Viestejä: 1 Liittymispäivä: 26.9.2017 Viimeisimmät viestit

Is it possible to install 4000 series speakers as "daisychained" or like bus install. Or is it mandatory to use distribution amplifier, when using more than 1 speaker / channel

anders-nyman, muokattu 4 Vuodet sitten.

RE: 4000 series, chain installation.

Youngling Viestejä: 4 Liittymispäivä: 11.3.2011 Viimeisimmät viestit


It is possible to daisy chain 4000-series speakers, the recommended maximum is 8 speakers / output channel.

Best regards,

Anders Nyman / Technical Support