Genelec Community Forum has been archived

Thank you for all the years of Community discussions and activity!

The time has come for us to retire the community forums, but we will keep everything available for reading. There is a lot of valuable content written over the years, and you'll be able to access all of that. However, no new posts can be written, or old posts modified.

If you have questions, we recommend you use the Support function on the bottom right corner to contact our Customer Support directly.

Alternatively, if you wish to engage in a community discussion with other people, there are many active forums available. There is also an active, fan managed GENELEC COMMUNITY in Facebook, and many Genelec employees are active in the discussions there.

We are sorry for any possible inconvenience this may cause you, but we hope to hear from you through the other channels mentioned above.

Genelec Support

Keskusteluryhmät

How to set 5.1 digital system without 9301A

meng, muokattu 3 Vuodet sitten.

How to set 5.1 digital system without 9301A

Padawan Viestejä: 27 Liittymispäivä: 17.12.2015 Viimeisimmät viestit

Hello,

Could you help me to know what is the your sugguestion of GLM setting for 5.1 digital system when I don't have the 9301A AES/EBU Multichannel Interface? Thanks.

Now, I have 8351x3 for FL, C, FR; 8331x2 for RL and RR; 7350x1. The 5.1 multi channel digital signals come from the Meridian 568.2mm.

1.In the bass management of GLM, I should select Global or individual?

2.Set the LFE channel gain 0 or +10dB?

3.Subwoofer AES/EBU digital channel only ‘B‘ or ’’both ‘A and B'?

4.Bass management filter 85Hz or 80Hz?

5.Pass through mode On or Off?

6.AutoPhase process, select RL monitor or FL to pair the 7350? When the position of 7350 is close to FR monitor.

Thanks.

Meng