Genelec Community Forum has been archived

Thank you for all the years of Community discussions and activity!

The time has come for us to retire the community forums, but we will keep everything available for reading. There is a lot of valuable content written over the years, and you'll be able to access all of that. However, no new posts can be written, or old posts modified.

If you have questions, we recommend you use the Support function on the bottom right corner to contact our Customer Support directly.

Alternatively, if you wish to engage in a community discussion with other people, there are many active forums available. There is also an active, fan managed GENELEC COMMUNITY in Facebook, and many Genelec employees are active in the discussions there.

We are sorry for any possible inconvenience this may cause you, but we hope to hear from you through the other channels mentioned above.

Genelec Support


8020D Volume Control

rabe, muokattu 3 Vuodet sitten.

8020D Volume Control

Youngling Viestejä: 0 Liittymispäivä: 24.1.2019 Viimeisimmät viestit

I recently bought a pair of 8020DMP to be largely used as speakers at home for llistening to Vinyl. I connected the Soeaker (XLR) to Clearaudio nano Phono preamp through (RCA). There is no volume control on the monitors and the volume control on the nano phono preamp is rigid delivering no sensitivity for managing monitor output. Does the monitor sensitivity has to do any thing with this, it’s factiry settings at the backside  point at -6 at one end and between +2 and +4 on the other end. Not sure which exactly it points to. Do I need to buy a 9030A volume control?

Any suggestions please....

jani-oksanen, muokattu 3 Vuodet sitten.

RE: 8020D Volume Control

Jedi Master Viestejä: 449 Liittymispäivä: 30.3.2017 Viimeisimmät viestit

Hi Rabe,

We noticed that you contacted to our support e-mail as well, and we have replied you there. If you, or any other have similiar problem please do not hesitate to contact us directly to e-mail

Best Regards,
Jani Oksanen
Customer Support Team