Genelec Community Forum has been archived

Thank you for all the years of Community discussions and activity!

The time has come for us to retire the community forums, but we will keep everything available for reading. There is a lot of valuable content written over the years, and you'll be able to access all of that. However, no new posts can be written, or old posts modified.

If you have questions, we recommend you use the Support function on the bottom right corner to contact our Customer Support directly.

Alternatively, if you wish to engage in a community discussion with other people, there are many active forums available. There is also an active, fan managed GENELEC COMMUNITY in Facebook, and many Genelec employees are active in the discussions there.

We are sorry for any possible inconvenience this may cause you, but we hope to hear from you through the other channels mentioned above.

Genelec Support

Keskusteluryhmät

Question about 8341 digital Setup

tlash, muokattu 3 Vuodet sitten.

Question about 8341 digital Setup

Youngling Viestejä: 0 Liittymispäivä: 21.2.2019 Viimeisimmät viestit

Hello,

Just recieved new set of 8341 and have some questions regarding setting them up via digital AES output from Universal Audio Apollow 16 mkII.  I've never used digital speakers before.   
I have the AES output going from Apollo 16 to first speaker, then AES through connected to input of second speaker.  Monitors are powered on and digital volume control is up on apollo, but I'm not hearing any audio through speakers.  

Do I need to flip digital switch on speakers so they recieve digital input from AES?   For instance flip switch on Left speaker to Digital A and right speaker to Digital B ?

Also, is it necessary to adjust the rotary level control or leave things default?