Genelec Community Forum has been archived

Thank you for all the years of Community discussions and activity!

The time has come for us to retire the community forums, but we will keep everything available for reading. There is a lot of valuable content written over the years, and you'll be able to access all of that. However, no new posts can be written, or old posts modified.

If you have questions, we recommend you use the Support function on the bottom right corner to contact our Customer Support directly.

Alternatively, if you wish to engage in a community discussion with other people, there are many active forums available. There is also an active, fan managed GENELEC COMMUNITY in Facebook, and many Genelec employees are active in the discussions there.

We are sorry for any possible inconvenience this may cause you, but we hope to hear from you through the other channels mentioned above.

Genelec Support


8010 bass distortion/cuts out

dioramasky, muokattu 4 Vuodet sitten.

8010 bass distortion/cuts out

Youngling Viestejä: 0 Liittymispäivä: 25.2.2019 Viimeisimmät viestit

Hi all,

About a year and a half ago, I purchased a pair of 8010's.  The left one has had some issues with bass frequences, if the volume is pushed even a little.  Recently, the problem has gotten worse, to the point that if the bass distortion is repeated, the monitor will crackle and cut out completely.

I've tested different cables, etc. and it doesn't appear to be the problem.

Any ideas about what might be causing this?  It's still under warranty.

Thank you for any help!




jani-oksanen, muokattu 4 Vuodet sitten.

RE: 8010 bass distortion/cuts out

Jedi Master Viestejä: 449 Liittymispäivä: 30.3.2017 Viimeisimmät viestit



If you have any problems with Genelec products, please fill service enquiry form from link below:


Best Regards,
Jani Oksanen
Customer Support Team