Genelec Community Forum has been archived

Thank you for all the years of Community discussions and activity!

The time has come for us to retire the community forums, but we will keep everything available for reading. There is a lot of valuable content written over the years, and you'll be able to access all of that. However, no new posts can be written, or old posts modified.

If you have questions, we recommend you use the Support function on the bottom right corner to contact our Customer Support directly.

Alternatively, if you wish to engage in a community discussion with other people, there are many active forums available. There is also an active, fan managed GENELEC COMMUNITY in Facebook, and many Genelec employees are active in the discussions there.

We are sorry for any possible inconvenience this may cause you, but we hope to hear from you through the other channels mentioned above.

Genelec Support

Keskusteluryhmät

5x 8010 + 7X50?

adrjork, muokattu 3 Vuodet sitten.

5x 8010 + 7X50?

Youngling Viestejä: 7 Liittymispäivä: 29.10.2015 Viimeisimmät viestit

Hi everyone,

I'd like to make a mini 5.1 system with 5x 8010 + a sub. The only sub "made for" 8010 is 7040, but it's only stereo, not surround. For surround the minimum is 7050/7350.
Unfortunately on 7050 manual, in Crossover chapter, there is written: Due to the input sensitivity of the 7050B subwoofer, it can only be used with Genelec 8020A, 8030A, 8130A, 1029A, 2029A and 2029B active loudspeakers.

Does this mean that 5x 8010 can't be connected to 7050/7350? If so, is there any possibility to make surround with 8010?

Thanks a lot.

jani-oksanen, muokattu 3 Vuodet sitten.

RE: 5x 8010 + 7X50?

Jedi Master Viestejä: 449 Liittymispäivä: 30.3.2017 Viimeisimmät viestit

Hello!

You can use 7040A with 5.1 system, if your pre-amplifier has an LFE output, you can set the monitors from the pre-amplifier settings to "Small", and then all frequencies below 85Hz will be played by the subwoofer. Please check the manual of your pre-amplifier/sound source for more information.

However, for 5.1 it is recommended to have an slightly bigger subwoofer, and our latest model 7050C can be used with 8010A's, and it also supports 5.1 connections.

You can find more information of this subwoofer from link below:

https://www.genelec.com/7050c-studio-subwoofer
 

Best Regards,
Jani Oksanen
Customer Support Team