Genelec Community Forum has been archived

Thank you for all the years of Community discussions and activity!

The time has come for us to retire the community forums, but we will keep everything available for reading. There is a lot of valuable content written over the years, and you'll be able to access all of that. However, no new posts can be written, or old posts modified.

If you have questions, we recommend you use the Support function on the bottom right corner to contact our Customer Support directly.

Alternatively, if you wish to engage in a community discussion with other people, there are many active forums available. There is also an active, fan managed GENELEC COMMUNITY in Facebook, and many Genelec employees are active in the discussions there.

We are sorry for any possible inconvenience this may cause you, but we hope to hear from you through the other channels mentioned above.

Genelec Support

Keskusteluryhmät

8331 monitors with a 7261 sub?

ericlambo, muokattu 4 Vuodet sitten.

8331 monitors with a 7261 sub?

Youngling Viestejä: 6 Liittymispäivä: 28.11.2017 Viimeisimmät viestit

I'm currently using the SE system with 8130 monitors and the 7261 sub. I'd like to upgrade the main monitors to 8331s and keep the sub. Will the sub work with these newer monitors and provide proper calibration via GLM3?

lukester, muokattu 4 Vuodet sitten.

RE: 8331 monitors with a 7261 sub?

Jedi Master Viestejä: 296 Liittymispäivä: 22.4.2010 Viimeisimmät viestit

Sure, will work.

can we talk you into bigger 8351s rather than 8331?

ericlambo, muokattu 4 Vuodet sitten.

RE: 8331 monitors with a 7261 sub?

Youngling Viestejä: 6 Liittymispäivä: 28.11.2017 Viimeisimmät viestit

I'd recently read elsewhere that that sub wouldn't work with the 83xx series but I hope you're right because I already own it so twould be a waste to sell it for a loss.

 

In my space (12' x 12'), especially with a sub, there's no advantage to the 8351, not enough to justify the cost difference.

jani-oksanen, muokattu 4 Vuodet sitten.

RE: 8331 monitors with a 7261 sub?

Jedi Master Viestejä: 449 Liittymispäivä: 30.3.2017 Viimeisimmät viestit

Hi there!


I'm sorry for late reply. 7261A can be used with 8331A but with some limitiations. The calibration and system should be used as below:

 

1. Calibrate the 8331A without the 7261A connected to GLM.
2. Unplug the ethernet cables from 8331A, and connect 7261A to GLM.
3. Calibrate the 7261A subwoofer
4. Control the volume of the whole system with 7261A connected only. Do not use 7261A and 8331A on the GLM network at the same time.

7261A was designed to be used with 8130A only, but it is possible to use with the 8331A with this trick.


Best Regards,
Jani Oksanen
Customer Support Team

ericlambo, muokattu 4 Vuodet sitten.

RE: 8331 monitors with a 7261 sub?

Youngling Viestejä: 6 Liittymispäivä: 28.11.2017 Viimeisimmät viestit

Thank you! That makes sense, and it's nice knowing that there's a work-around.

Since posting this, I recalibrated my room and, for whatever reason, the new profile (I used GLM3 whereas before I'd used V2) sounds much better. More detail, greater separation between instruments, flatter response. It made the upgrade to the 8331s feel less necessary. Not entirely unnecessary, as I'm sure the newer monitors are an improvement, but things sound better for now.