Genelec Community Forum has been archived

Thank you for all the years of Community discussions and activity!

The time has come for us to retire the community forums, but we will keep everything available for reading. There is a lot of valuable content written over the years, and you'll be able to access all of that. However, no new posts can be written, or old posts modified.

If you have questions, we recommend you use the Support function on the bottom right corner to contact our Customer Support directly.

Alternatively, if you wish to engage in a community discussion with other people, there are many active forums available. There is also an active, fan managed GENELEC COMMUNITY in Facebook, and many Genelec employees are active in the discussions there.

We are sorry for any possible inconvenience this may cause you, but we hope to hear from you through the other channels mentioned above.

Genelec Support

Keskusteluryhmät

Cleaning drivers

cortes, muokattu 3 Vuodet sitten.

Cleaning drivers

Youngling Viestejä: 3 Liittymispäivä: 20.10.2019 Viimeisimmät viestit

Hi all,

I just bought some  8331.  The lack of grill and the natural dust accumulation in the concentric drivers worries me.  How do you clean it?. I don't want a layer of dust (my environment is very clean, but still) on the drivers in the long term.

And, is there any grill or something to protect the drivers, somehow something like the grills of passive speakers?.

 

Best,

 

 

 

manutal, muokattu 3 Vuodet sitten.

RE: Cleaning drivers

Jedi Knight Viestejä: 180 Liittymispäivä: 25.4.2014 Viimeisimmät viestit

I use a microfiber cloth carefully.

lukester, muokattu 3 Vuodet sitten.

RE: Cleaning drivers

Jedi Master Viestejä: 296 Liittymispäivä: 22.4.2010 Viimeisimmät viestit

I use any type of cloth without being particulary careful.

midtone drivers arent particulary sensitive.

Treble drivers are, that's why they have a grille. blow on them if you like. not for hours at a time.

cortes, muokattu 3 Vuodet sitten.

RE: Cleaning drivers

Youngling Viestejä: 3 Liittymispäivä: 20.10.2019 Viimeisimmät viestit

Hi,

 

thanks for sharing.

 Do you think a blower like this would be safe for mid driver and tweeter?

https://www.amazon.es/JJC-potenciaremos-c%C3%A1maras-objetivo-limpieza/dp/B00F1WGUGK/ref=sr_1_8?__mk_es_ES=%C3%85M%C3%85%C5%BD%C3%95%C3%91&keywords=Blower&qid=1572000454&sr=8-8

 

lukester, muokattu 3 Vuodet sitten.

RE: Cleaning drivers

Jedi Master Viestejä: 296 Liittymispäivä: 22.4.2010 Viimeisimmät viestit

absolutely safe. Not sure wheter it's stong enough to move any of the dust.

the microfiber cloth is also good advice.