Genelec Community Forum has been archived

Thank you for all the years of Community discussions and activity!

The time has come for us to retire the community forums, but we will keep everything available for reading. There is a lot of valuable content written over the years, and you'll be able to access all of that. However, no new posts can be written, or old posts modified.

If you have questions, we recommend you use the Support function on the bottom right corner to contact our Customer Support directly.

Alternatively, if you wish to engage in a community discussion with other people, there are many active forums available. There is also an active, fan managed GENELEC COMMUNITY in Facebook, and many Genelec employees are active in the discussions there.

We are sorry for any possible inconvenience this may cause you, but we hope to hear from you through the other channels mentioned above.

Genelec Support

Keskusteluryhmät

8341 system BEEP

tiagoabrahao, muokattu 3 Vuodet sitten.

8341 system BEEP

Youngling Viestejä: 14 Liittymispäivä: 15.5.2019 Viimeisimmät viestit

Hello there.

I'm having an specific issue where, when starting my system, my pair of Genelec 8341 beeps...   right first, then left, then right...  i'm not sure if it each speaker beeps exactly twice but i never had any of this beeps before yesterday, i believe. If there's any audio playing on the inputs, it will peak near the maximum volume, no matter if my volume knob it's down to zero. This volume peak happened once... in the middle of the beeps.  I'm sure it's not a beep playing from the input as i dropped my volume knob to zero and the beep/volume peak happened anyway.

i have the GLM module and the volume knob within the pair of 8341.  

i'm not sure if it's from the GLM module or from the speakers... Does anyone had any issues related to that? 

 

glm beep 8341
tiagoabrahao, muokattu 3 Vuodet sitten.

RE: 8341 system BEEP

Youngling Viestejä: 14 Liittymispäivä: 15.5.2019 Viimeisimmät viestit

just noted that the LED goes RED when the beep happens... 

jani-oksanen, muokattu 3 Vuodet sitten.

RE: 8341 system BEEP

Jedi Master Viestejä: 449 Liittymispäivä: 30.3.2017 Viimeisimmät viestit

Hello,

I'm sorry to hear about the issue. Could you please contact us through our support format, and we will get back to you directly by e-mail with further information. I apology for the inconvenience.

https://www.genelec.com/customer-service


​​​​​​​Best Regards,
Jani Oksanen
​​​​​​​Customer Support Team

 

tiagoabrahao, muokattu 3 Vuodet sitten.

RE: 8341 system BEEP

Youngling Viestejä: 14 Liittymispäivä: 15.5.2019 Viimeisimmät viestit

Ok. thank you Jani. 

 

natt, muokattu 3 Vuodet sitten.

RE: 8341 system BEEP

Youngling Viestejä: 8 Liittymispäivä: 21.7.2012 Viimeisimmät viestit

got exactly the same thing happening, with the wireless remote. Scares the willies out of me! Easy fix you can share or do I need to log a ticket too?

Mix & Mouse, muokattu 3 Vuodet sitten.

RE: 8341 system BEEP

Youngling Viestejä: 3 Liittymispäivä: 26.5.2020 Viimeisimmät viestit

Hi,
​​​​​​​We got the same problem here. But just for one of our speaker. The speaker works but we got one beep and after 3 or 4 beeps. It's the first time we got this. Our signal is analog. We don't have GLM.
​​​​​​​Can you help us ?

Thomas

tiagoabrahao, muokattu 2 Vuodet sitten.

RE: 8341 system BEEP

Youngling Viestejä: 14 Liittymispäivä: 15.5.2019 Viimeisimmät viestit

Hello there.  Updating.  The beeps was gone.  Not sure what happened. Maybe the fw updated itself on. the GLM. But no more beeps.
Hope you guys got your beeps fixed as well.