Genelec Community Forum has been archived

Thank you for all the years of Community discussions and activity!

The time has come for us to retire the community forums, but we will keep everything available for reading. There is a lot of valuable content written over the years, and you'll be able to access all of that. However, no new posts can be written, or old posts modified.

If you have questions, we recommend you use the Support function on the bottom right corner to contact our Customer Support directly.

Alternatively, if you wish to engage in a community discussion with other people, there are many active forums available. There is also an active, fan managed GENELEC COMMUNITY in Facebook, and many Genelec employees are active in the discussions there.

We are sorry for any possible inconvenience this may cause you, but we hope to hear from you through the other channels mentioned above.

Genelec Support

Keskusteluryhmät

Spdif to AES/EBU with normal XLR cable

maxx999, muokattu 2 Vuodet sitten.

Spdif to AES/EBU with normal XLR cable

Youngling Viestejä: 3 Liittymispäivä: 2.9.2019 Viimeisimmät viestit

Seems to work perfectly with short cables. I could not hear any noise or clipping or buzzing. Are the impedance converter and AES/EBU cables really needed?

lukester, muokattu 2 Vuodet sitten.

RE: Spdif to AES/EBU with normal XLR cable

Jedi Master Viestejä: 296 Liittymispäivä: 22.4.2010 Viimeisimmät viestit

for longer cable runs: probably

super sensitive people migth notice jitter before dropouts in the signal become a concern.