Genelec Community Forum has been archived

Thank you for all the years of Community discussions and activity!

The time has come for us to retire the community forums, but we will keep everything available for reading. There is a lot of valuable content written over the years, and you'll be able to access all of that. However, no new posts can be written, or old posts modified.

If you have questions, we recommend you use the Support function on the bottom right corner to contact our Customer Support directly.

Alternatively, if you wish to engage in a community discussion with other people, there are many active forums available. There is also an active, fan managed GENELEC COMMUNITY in Facebook, and many Genelec employees are active in the discussions there.

We are sorry for any possible inconvenience this may cause you, but we hope to hear from you through the other channels mentioned above.

Genelec Support

Keskusteluryhmät

F2 sub with G3 doesn’t not start when DAC is waking up from sleep mode

joker, muokattu 2 Vuodet sitten.

F2 sub with G3 doesn’t not start when DAC is waking up from sleep mode

Youngling Viestejä: 7 Liittymispäivä: 24.6.2014 Viimeisimmät viestit

I have a F2 with G3 hooked up with a TEAC NT-503 Preamp/DAC. The TEAC has a digital volume control. After the TEAC has fallen asleep, and then wakes up again when music plays, the F2 powers on and the LED is on, but somehow does not give sound. Only when switching the F2 Manuale off and in again it detects the signal and plays sound. Quite annoying. Any ideas whether this is more a F2 issue or from the TEAC preamp?