Genelec Community Forum has been archived

Thank you for all the years of Community discussions and activity!

The time has come for us to retire the community forums, but we will keep everything available for reading. There is a lot of valuable content written over the years, and you'll be able to access all of that. However, no new posts can be written, or old posts modified.

If you have questions, we recommend you use the Support function on the bottom right corner to contact our Customer Support directly.

Alternatively, if you wish to engage in a community discussion with other people, there are many active forums available. There is also an active, fan managed GENELEC COMMUNITY in Facebook, and many Genelec employees are active in the discussions there.

We are sorry for any possible inconvenience this may cause you, but we hope to hear from you through the other channels mentioned above.

Genelec Support

Keskusteluryhmät

Possible to have the GLM in the middle of the network chain

soundmixdude, muokattu 2 Vuodet sitten.

Possible to have the GLM in the middle of the network chain

Youngling Viestejä: 6 Liittymispäivä: 25.12.2018 Viimeisimmät viestit

I have a SAM 83xx setup with a GLM usb device. Can the GLM be connected in middle of the network chain or does it have to be at the beginning or end?

E.g. LS speaker - L speaker - C speaker - R speaker - GLM - RS speaker

janne-koo, muokattu 2 Vuodet sitten.

RE: Possible to have the GLM in the middle of the network chain

Padawan Viestejä: 73 Liittymispäivä: 26.10.2015 Viimeisimmät viestit

According to the documentation the brains are always at the beginning, or at the beginning and the end. The other port is for terminating a long network, ie. making it a ring; Other than that, there's no set order. This means that if you link your LS and RS speakers as well, you should be set...

matscarlstedtq, muokattu 1 Vuosi sitten.

RE: Possible to have the GLM in the middle of the network chain

Youngling Viestejä: 2 Liittymispäivä: 16.3.2015 Viimeisimmät viestit

I have seen a "split box" that made it possible to split the chain to a star net instead of daisychaining. I haven't seen a price or a modelno though. This was at a genelec event so it was a real thing. Not a DIY

The protocol is for me unknown but ill guess its rs422/485. I it works fine to split except if you use really long cables and/or significant different length of them.