Genelec Community Forum has been archived

Thank you for all the years of Community discussions and activity!

The time has come for us to retire the community forums, but we will keep everything available for reading. There is a lot of valuable content written over the years, and you'll be able to access all of that. However, no new posts can be written, or old posts modified.

If you have questions, we recommend you use the Support function on the bottom right corner to contact our Customer Support directly.

Alternatively, if you wish to engage in a community discussion with other people, there are many active forums available. There is also an active, fan managed GENELEC COMMUNITY in Facebook, and many Genelec employees are active in the discussions there.

We are sorry for any possible inconvenience this may cause you, but we hope to hear from you through the other channels mentioned above.

Genelec Support

Keskusteluryhmät

7350A without GLM

yaschan, muokattu 3 Vuodet sitten.

7350A without GLM

Youngling Viestejä: 23 Liittymispäivä: 24.6.2010 Viimeisimmät viestit

The point of SAM is to use the GLM to calibrate.

however I wonder how does 7350A work default out of the box with analog 8000 series speakers? 

lukester, muokattu 3 Vuodet sitten.

RE: 7350A without GLM

Jedi Master Viestejä: 296 Liittymispäivä: 22.4.2010 Viimeisimmät viestit

sure!

the digital sub has a bit of a delay. like 80cm long delay.

you can make up for this in placement or maybe it doesn't really matter to begin with.

yaschan, muokattu 3 Vuodet sitten.

RE: 7350A without GLM

Youngling Viestejä: 23 Liittymispäivä: 24.6.2010 Viimeisimmät viestit

Frankly I think I can’t afford GLM at the moment as things look uncertain at work .

there is no way to adjust phase or  crossover or such things without the glm box right?

it would be nice to have option of GLM box rental as its a bit expensive and basically won’t be needed after calibration right?

lukester, muokattu 3 Vuodet sitten.

RE: 7350A without GLM

Jedi Master Viestejä: 296 Liittymispäivä: 22.4.2010 Viimeisimmät viestit

If you're using them in analog mode, you won't need the GLM.

If you switch to digital input, you'll need the GLM set to adjust the volume.

And yes, you need glm for phase ect.

if the tops are analog, you can only use the defaul 85Hz crossover.

yaschan, muokattu 3 Vuodet sitten.

RE: 7350A without GLM

Youngling Viestejä: 23 Liittymispäivä: 24.6.2010 Viimeisimmät viestit
lukester:

If you're using them in analog mode, you won't need the GLM.

If you switch to digital input, you'll need the GLM set to adjust the volume.

And yes, you need glm for phase ect.

if the tops are analog, you can only use the defaul 85Hz crossover.

 

Hi

thanks that’s pretty cool. Yes I intend to use them in analog mode.

about the slight delay mentioned above, does that also happen in analog mode? I guess so, right?

I guess I won’t be minding about the phase then. How much is that actually a problem?

 

 

 

lukester, muokattu 3 Vuodet sitten.

RE: 7350A without GLM

Jedi Master Viestejä: 296 Liittymispäivä: 22.4.2010 Viimeisimmät viestit
yaschan:
lukester:
 

about the slight delay mentioned above, does that also happen in analog mode? I guess so, right?

 

 

Yeah. It's just the delay of the digital dsp, no way to bypass.

I don't think it's much of a problem.

everybody who has the sub 80cm further from the ears than one of the tops has the same problem. which is basically everybody.

adjusting the phase should probably kinda fix this i guess?

 

 

 

 

yaschan, muokattu 3 Vuodet sitten.

RE: 7350A without GLM

Youngling Viestejä: 23 Liittymispäivä: 24.6.2010 Viimeisimmät viestit

Ahhh it sounds so damn good even with just the default setting just plugging it in via analog. My room has a lot of glass wool panels so this maybe helps but, GOSH this just sounds perfect,  my ears don't feel any imbalance to the sound. Tight and controlled not too much and not too little, and the sound blends in perfectly with the main speakers, it sounds like the bass is coming from them, not the sub.
This is best thing that has happened to my studio ever.

jani-oksanen, muokattu 3 Vuodet sitten.

RE: 7350A without GLM

Jedi Master Viestejä: 449 Liittymispäivä: 30.3.2017 Viimeisimmät viestit

Hello,

Just want to mention, if GLM capabilities or Digital signal is not needed- then I would recommend the 7050C subwoofer.

https://www.genelec.com/7050c ​​​​​​​