Genelec Community Forum has been archived

Thank you for all the years of Community discussions and activity!

The time has come for us to retire the community forums, but we will keep everything available for reading. There is a lot of valuable content written over the years, and you'll be able to access all of that. However, no new posts can be written, or old posts modified.

If you have questions, we recommend you use the Support function on the bottom right corner to contact our Customer Support directly.

Alternatively, if you wish to engage in a community discussion with other people, there are many active forums available. There is also an active, fan managed GENELEC COMMUNITY in Facebook, and many Genelec employees are active in the discussions there.

We are sorry for any possible inconvenience this may cause you, but we hope to hear from you through the other channels mentioned above.

Genelec Support

Keskusteluryhmät

Genelec 8260A with RME ADI-2-Pro FS R Black Edition.

libattery, muokattu 2 Vuodet sitten.

Genelec 8260A with RME ADI-2-Pro FS R Black Edition.

Youngling Viestejä: 9 Liittymispäivä: 4.8.2016 Viimeisimmät viestit

I bought a RME ADI-2-Pro FS R Black Edition recently.

Because It has remote control now, “R” stand for Remote. :)

 

I hooked up my 8260A with AES/EBU cable.

Because ADI-2-Pro can make Digital out copy Analogue out - Volume, EQ, Loudness … everything. 

It’s really convenient to listen to music. 

I can control all functions with the remote control. 

 

Now I can finally turn off the GLM kit and keep it hidden. :)

farout, muokattu 2 Vuodet sitten.

RE: Genelec 8260A with RME ADI-2-Pro FS R Black Edition.

Youngling Viestejä: 0 Liittymispäivä: 1.4.2020 Viimeisimmät viestit

Excellent! I got the limited ADI-2 Pro FS Black Edition that I'm using with my 8331s (AES) and headphones and it's met all expectations. Maybe I'll also get the R edition for media center for the remote :)

Since the GLM software is not compatible with macOS Catalina, I am seeking a way to control the 8331 solely from the RME interface. Could you help out by providing the settings configuration you are using to achieve what you're doing? I tried changing Setup > Options > Dig. Out Source to Main Out but getting a signal. On screen, the "1/2" at lower left reads "off".

Thanks!

libattery, muokattu 2 Vuodet sitten.

RE: Genelec 8260A with RME ADI-2-Pro FS R Black Edition.

Youngling Viestejä: 9 Liittymispäivä: 4.8.2016 Viimeisimmät viestit

 

ok 

On screen, the "1/2" at lower left reads "off". 

==> I guess because of headphones are connected.  

if you want to listen headphones and speakers simultaneously,

press SETUP --> Turn the lower encoder 2 until "Phones"

--> go down to "Mute v. TRS 3/4" -->  "OFF"

now, you can listen headphones and speakers simultaneously