Genelec Community Forum has been archived

Thank you for all the years of Community discussions and activity!

The time has come for us to retire the community forums, but we will keep everything available for reading. There is a lot of valuable content written over the years, and you'll be able to access all of that. However, no new posts can be written, or old posts modified.

If you have questions, we recommend you use the Support function on the bottom right corner to contact our Customer Support directly.

Alternatively, if you wish to engage in a community discussion with other people, there are many active forums available. There is also an active, fan managed GENELEC COMMUNITY in Facebook, and many Genelec employees are active in the discussions there.

We are sorry for any possible inconvenience this may cause you, but we hope to hear from you through the other channels mentioned above.

Genelec Support

Keskusteluryhmät

Genelec SAM speaker set configuration with av-preamp

petri.kotiranta, muokattu 2 Vuodet sitten.

Genelec SAM speaker set configuration with av-preamp

Youngling Viestejä: 3 Liittymispäivä: 17.5.2020 Viimeisimmät viestit

Are there instructions how to configure SAM system properly with av-receiver? I have 3x8350, 4x8330 and 7370 subwoofer. Am I doing right if I set the speakers to full band ignoring Genelec's own crossover when calibrating speakers? Subwoofer is attached to av-receiver so the receiver should do the crossover. Should I set front speakers large or small. Based on my tests I have not noticed any difference.