Genelec Community Forum has been archived

Thank you for all the years of Community discussions and activity!

The time has come for us to retire the community forums, but we will keep everything available for reading. There is a lot of valuable content written over the years, and you'll be able to access all of that. However, no new posts can be written, or old posts modified.

If you have questions, we recommend you use the Support function on the bottom right corner to contact our Customer Support directly.

Alternatively, if you wish to engage in a community discussion with other people, there are many active forums available. There is also an active, fan managed GENELEC COMMUNITY in Facebook, and many Genelec employees are active in the discussions there.

We are sorry for any possible inconvenience this may cause you, but we hope to hear from you through the other channels mentioned above.

Genelec Support

Keskusteluryhmät

Bypassing 8351A Calibration

goldie, muokattu 1 Vuosi sitten.

Bypassing 8351A Calibration

Youngling Viestejä: 0 Liittymispäivä: 19.1.2019 Viimeisimmät viestit

My 8351A's and a 9310A volume controller are connected via the GLM network adapter. I have the "Stored" dipswitch on the back of the monitors set to OFF.

 

Is GLM calibration bypassed in this arrangement? I'd like to use the 9310A volume controller w/ calibration turned off.