Genelec Community Forum has been archived

Thank you for all the years of Community discussions and activity!

The time has come for us to retire the community forums, but we will keep everything available for reading. There is a lot of valuable content written over the years, and you'll be able to access all of that. However, no new posts can be written, or old posts modified.

If you have questions, we recommend you use the Support function on the bottom right corner to contact our Customer Support directly.

Alternatively, if you wish to engage in a community discussion with other people, there are many active forums available. There is also an active, fan managed GENELEC COMMUNITY in Facebook, and many Genelec employees are active in the discussions there.

We are sorry for any possible inconvenience this may cause you, but we hope to hear from you through the other channels mentioned above.

Genelec Support

Keskusteluryhmät

Soft flush mounting Genelec subs - gap needed?

rasmus-faber, muokattu 1 Vuosi sitten.

Soft flush mounting Genelec subs - gap needed?

Youngling Viestejä: 3 Liittymispäivä: 10.4.2012 Viimeisimmät viestit

Hello! Looking for some advice. I'm placing 7360 subs inside an rockwool absorber wall. The sub's front will be adjacent to the fabric covered surface, with the body of the sub inside the soft absorber material.

My question is, in this case, can I get away without the 7,5cm air gap on the port side, which is described as necessary for air flow in the manual, when flush mounting inside a solid wall. My thinking is there is still decent flow of air into the rockwool anyway. 

papafabio, muokattu 1 Vuosi sitten.

RE: Soft flush mounting Genelec subs - gap needed?

Youngling Viestejä: 2 Liittymispäivä: 15.11.2018 Viimeisimmät viestit

I would leave even more than 7.5 cm arigap if i'd be in the same situation. 

From https://www.rockwool.com/why-stone-wool/

"Stone wool also effectively reduces airflow and sound transmission, while providing higher airflow resistivity"

and

Consider the thermal properties of rockwool or stone wool, possible heat from the sub will not be dissipated easily since the subs would be surrounded by insulation.

You would get way less airflow as you're probably assuming. Still a good idea the rockwool-wall, but just leave a bit more space