Genelec Community Forum has been archived

Thank you for all the years of Community discussions and activity!

The time has come for us to retire the community forums, but we will keep everything available for reading. There is a lot of valuable content written over the years, and you'll be able to access all of that. However, no new posts can be written, or old posts modified.

If you have questions, we recommend you use the Support function on the bottom right corner to contact our Customer Support directly.

Alternatively, if you wish to engage in a community discussion with other people, there are many active forums available. There is also an active, fan managed GENELEC COMMUNITY in Facebook, and many Genelec employees are active in the discussions there.

We are sorry for any possible inconvenience this may cause you, but we hope to hear from you through the other channels mentioned above.

Genelec Support

Keskusteluryhmät

Compatibility 8240 DSP & GLM2 vs. GLM3

infraschall, muokattu 1 Vuosi sitten.

Compatibility 8240 DSP & GLM2 vs. GLM3

Youngling Viestejä: 1 Liittymispäivä: 31.10.2014 Viimeisimmät viestit

Sorry if this question has already been asked and answered but I've been searching the forum for a reasonable amount of time and haven't found anything which clearly susses it out for me.

With that out of the way, I have a pair of 8240 DSP and was considering a calibration utility and wanted to know if they're compatible with either or both GLM v2 or v3 and which one makes more sense for my setup. For example if the features that are new in GLM3 are something my monitors can't take advantage of so v2 would be the smart choice, etc.

Cheers

Robert

antong, muokattu 1 Vuosi sitten.

RE: Compatibility 8240 DSP & GLM2 vs. GLM3

Padawan Viestejä: 76 Liittymispäivä: 12.6.2020 Viimeisimmät viestit

Hello, Robert!

All of the GLM software versions support 82XX-series models, but GLM 2 and 3 software are only supported by our newest network adapter (8300-601). Theoretically you can use old network adapter (8200-602) with GLM 1.5 software to calibrate your speakers. Though GLM 1.5 is not anymore supported and we therefore cannot guarantee its proper functioning.

We recommend to use our new network adapter (8300-601) with GLM 3 software for best experience, improved calibration process and other features.

Anton,
Factory service team