Genelec Community Forum has been archived

Thank you for all the years of Community discussions and activity!

The time has come for us to retire the community forums, but we will keep everything available for reading. There is a lot of valuable content written over the years, and you'll be able to access all of that. However, no new posts can be written, or old posts modified.

If you have questions, we recommend you use the Support function on the bottom right corner to contact our Customer Support directly.

Alternatively, if you wish to engage in a community discussion with other people, there are many active forums available. There is also an active, fan managed GENELEC COMMUNITY in Facebook, and many Genelec employees are active in the discussions there.

We are sorry for any possible inconvenience this may cause you, but we hope to hear from you through the other channels mentioned above.

Genelec Support

Keskusteluryhmät

8010A Slowly Blinking Green Light issue?

thebigonion, muokattu 7 Kuukautta sitten.

8010A Slowly Blinking Green Light issue?

Youngling Viestejä: 2 Liittymispäivä: 3.8.2020 Viimeisimmät viestit

Hello everyone, I have two 8010A, all worked perfectly untill a few days ago. I went home at night and turned on the power. One of my 8010A stopped working. there is no sound coming out, while only the LED indicator on the front panel is blinking green with a slow flashing frequency. The another one is fine. I have tried to swap the power cords of the two 8010A, but with no luck, the problem 8010a still keeps blinking green. Please help me, what should I do? Thank you.

ADD: I turned on the "ISS DISABLE", and the indicator light was keeping green,sound coming out, then I turned it back to "OFF". Now everything is back to normal.

-----------------------------

NEWS at 2021/06/22:

After 10 months, unfortunately, the issue described above suddenly reappeared when I was using the speakers. No luck with turning ON or OFF the "ISS DISABLE" DIP switch.
Then, I unplug the audio input cable, "ISS DISABLE" DIP switch to ON, and keep the power on. After about 10 minutes of green light flashing, the issue was disappeared by itself. Now it can work as normal again. Very weird.
I will continue to pay attention to this issue.

After several hours of use, another issue appeared. The indicator light would occasionally flash a few times and then returned to normal. This situation will happen repeatedly. DAMN!

 

Is there an unexpected hardware issue on my 8010A?

rubensdb, muokattu 1 Vuosi sitten.

RE: 8010A Slowly Blinking Green Light issue?

Youngling Viestejä: 7 Liittymispäivä: 24.6.2020 Viimeisimmät viestit

Green blink every 10 sec.:

Monitor is an ISS power saving sleep state.

”There is a slight delay in the automatic power- ing up. If this is undesirable, the ISSTM function can be disabled by setting the “ISS DISABLE” switch on the back panel to “ON” position. In this mode, the monitor is powered on and off using the power switch on the back panel.”

thebigonion, muokattu 1 Vuosi sitten.

RE: 8010A Slowly Blinking Green Light issue?

Youngling Viestejä: 2 Liittymispäivä: 3.8.2020 Viimeisimmät viestit

Thank you very much for your reply, the problem has been solved, as you said, I turned on the "ISS DISABLE", and the indicator light was keeping green, sound coming out, then I turned it back to "OFF". Now everything is back to normal.

What makes me feel helpless and confused is that I tried to press the power button many times, but there was no response at all. I even tried to re-plug the power cord directly, the problem still exists.The blink is about 1/s.

Thank you!

rubensdb, muokattu 1 Vuosi sitten.

RE: [SOLVED]8010A Slowly Blinking Green Light issue?

Youngling Viestejä: 7 Liittymispäivä: 24.6.2020 Viimeisimmät viestit

Great!