Genelec Community Forum has been archived

Thank you for all the years of Community discussions and activity!

The time has come for us to retire the community forums, but we will keep everything available for reading. There is a lot of valuable content written over the years, and you'll be able to access all of that. However, no new posts can be written, or old posts modified.

If you have questions, we recommend you use the Support function on the bottom right corner to contact our Customer Support directly.

Alternatively, if you wish to engage in a community discussion with other people, there are many active forums available. There is also an active, fan managed GENELEC COMMUNITY in Facebook, and many Genelec employees are active in the discussions there.

We are sorry for any possible inconvenience this may cause you, but we hope to hear from you through the other channels mentioned above.

Genelec Support

Keskusteluryhmät

Mix both left and right channel to a single speaker.

khalinguyen191999, muokattu 2 Vuodet sitten.

Mix both left and right channel to a single speaker.

Youngling Viestejä: 0 Liittymispäivä: 15.9.2020 Viimeisimmät viestit

Hello, sorry for this very unusual request.
Listening to genelec since many years now no other speakers satisfy the ear..for late night listing I just want a single speaker to produce sound eg. like Bluetooth speakers.. what will be the best way to sum both left and right channel signal into a mono signal..for feeding genelec 8010 or 8020.. source will be media players or mobile phones.. any help will much appreciated..thanks

speaker mix both

Liitteet:

antong, muokattu 2 Vuodet sitten.

RE: Mix both left and right channel to a single speaker.

Padawan Viestejä: 76 Liittymispäivä: 12.6.2020 Viimeisimmät viestit

Hello, khalinguyen191999!

One way is to use splitter cable (Y cable). It will convert right and left output channel into one. If you don't want to use adapters, there are also mini stereo jack - mono XLR cables on the market that will do the job.

Thank you for your support!

janne-koo, muokattu 2 Vuodet sitten.

RE: Mix both left and right channel to a single speaker.

Padawan Viestejä: 73 Liittymispäivä: 26.10.2015 Viimeisimmät viestit

NO! Don't use Y cables for summing signals, with bad luck you might even damage your equipment. Y-cables are meant for splitting, mixing signals requires resistors, easy enough to fit inside the XLR connector. Do some googling!

Here's one valid schematic:

https://electronics.stackexchange.com/questions/87787/stereo-line-level-to-mono-microphone-level

Fun fact: Most or none of the ready-made cables have resistors, need to do it yourself.
​​​

antong, muokattu 2 Vuodet sitten.

RE: Mix both left and right channel to a single speaker.

Padawan Viestejä: 76 Liittymispäivä: 12.6.2020 Viimeisimmät viestit

Thanks, janne-koo! My mistake. Better to use mini stereo jack - mono XLR cable in this situation.

janne-koo, muokattu 2 Vuodet sitten.

RE: Mix both left and right channel to a single speaker.

Padawan Viestejä: 73 Liittymispäivä: 26.10.2015 Viimeisimmät viestit

A (mini-)TRS(-jack) to XLR cable will not work either, unless it's built for this exact purpose with the required resistors; A store-bought TRS-XLR adapter is more likely to be wired to connect some weird balanced output mobile device.​​​​ A multimeter will quickly reveal the ugly truth, ie. no resistors and the wrong pinout.

​​​​​​​As surprising as it may seem, it is very likely that this kind of a cable can not be bought ready-made.