Genelec Community Forum has been archived

Thank you for all the years of Community discussions and activity!

The time has come for us to retire the community forums, but we will keep everything available for reading. There is a lot of valuable content written over the years, and you'll be able to access all of that. However, no new posts can be written, or old posts modified.

If you have questions, we recommend you use the Support function on the bottom right corner to contact our Customer Support directly.

Alternatively, if you wish to engage in a community discussion with other people, there are many active forums available. There is also an active, fan managed GENELEC COMMUNITY in Facebook, and many Genelec employees are active in the discussions there.

We are sorry for any possible inconvenience this may cause you, but we hope to hear from you through the other channels mentioned above.

Genelec Support

Keskusteluryhmät

Bass in a 2100 cubic foot room, Genelec 8260 + 7270

stevenswall, muokattu 1 Vuosi sitten.

Bass in a 2100 cubic foot room, Genelec 8260 + 7270

Youngling Viestejä: 7 Liittymispäivä: 4.12.2018 Viimeisimmät viestit

When watching Interstellar or other movies, sometimes the 8260 can't quite pull off enough bass and clips a little. Is a 12" subwoofer going to work in tandem with the 10" bass driver in the 8260, or is it going to take all the bass from them and do it on the subwoofer.

I'm not sure if there's a way to do it, but I'd like to have one 7270 subwoofer, maybe a second in a year due to the expensive markup in the US, but I'm not sure a single 12" driver can replace two 20" drivers.

Is there a chart for room sizes and subwoofers? I do get flat down to 18hz, but with deep notes I'm sure it's not playing at 113 dB on the 8260.