Genelec Community Forum has been archived

Thank you for all the years of Community discussions and activity!

The time has come for us to retire the community forums, but we will keep everything available for reading. There is a lot of valuable content written over the years, and you'll be able to access all of that. However, no new posts can be written, or old posts modified.

If you have questions, we recommend you use the Support function on the bottom right corner to contact our Customer Support directly.

Alternatively, if you wish to engage in a community discussion with other people, there are many active forums available. There is also an active, fan managed GENELEC COMMUNITY in Facebook, and many Genelec employees are active in the discussions there.

We are sorry for any possible inconvenience this may cause you, but we hope to hear from you through the other channels mentioned above.

Genelec Support

Keskusteluryhmät

Can't complete calibration with subwoofer

krisse, muokattu 1 Vuosi sitten.

Can't complete calibration with subwoofer

Youngling Viestejä: 3 Liittymispäivä: 7.11.2017 Viimeisimmät viestit

I have a 2.1 setup that consists of two 8250's and a 7270 subwoofer, using AES. Now after a fresh install of Windows 10 and the latest GLM -software (3.2.0) I am unable to complete the calibration with the subwoofer active in GLM. I can calibrate the speakers just fine, but whenever I add the subwoofer into the calibration, it starts to loop the subwoofer calibration sound. In the end GLM just crashes when I move the mouse and won't respond so I have to force shut down from the task manager. I've tried the GLM4.0 beta version but it has the same problem. I've tried with and without Cloud Autocal, no change. I also contacted customer service by email but haven't yet received a reply so I'm hoping someone here could help. I can't remember what specific version of GLM 3.0 I was using prior to this (it's been almost a year since I installed it), but is there any chance I could get one of the older versions to try out?

janne-koo, muokattu 1 Vuosi sitten.

RE: Can't complete calibration with subwoofer

Padawan Viestejä: 73 Liittymispäivä: 26.10.2015 Viimeisimmät viestit

(file/link removed)

I guess they won't mind, since other previous releases are available... Quite frankly, I've found 3.1.1 to be the best GLM version (given the hardware support covers the need). GLM 4 should leave it in the dust, but not quite yet...
I won't keep that file available for very long though, let me know when you have it and how it went.

Also check your GLM network cabling. (Just a feeling.)

krisse, muokattu 1 Vuosi sitten.

RE: Can't complete calibration with subwoofer

Youngling Viestejä: 3 Liittymispäivä: 7.11.2017 Viimeisimmät viestit

Got it, thanks. I'll report back soon.

krisse, muokattu 1 Vuosi sitten.

RE: Can't complete calibration with subwoofer

Youngling Viestejä: 3 Liittymispäivä: 7.11.2017 Viimeisimmät viestit

3.1.1 works flawlessly. Didn't check any of the cables though no problems whatsoever. Kiitos!

janne-koo, muokattu 1 Vuosi sitten.

RE: Can't complete calibration with subwoofer

Padawan Viestejä: 73 Liittymispäivä: 26.10.2015 Viimeisimmät viestit

Well I'll be... Even with my version preference, I didn't expect that result... Glad to help!
​​​​​​​
Genelec would be well advised to include 3.1.1 as a downloadable previous release - on both platforms.