Genelec Community Forum has been archived

Thank you for all the years of Community discussions and activity!

The time has come for us to retire the community forums, but we will keep everything available for reading. There is a lot of valuable content written over the years, and you'll be able to access all of that. However, no new posts can be written, or old posts modified.

If you have questions, we recommend you use the Support function on the bottom right corner to contact our Customer Support directly.

Alternatively, if you wish to engage in a community discussion with other people, there are many active forums available. There is also an active, fan managed GENELEC COMMUNITY in Facebook, and many Genelec employees are active in the discussions there.

We are sorry for any possible inconvenience this may cause you, but we hope to hear from you through the other channels mentioned above.

Genelec Support

Keskusteluryhmät

Sound quality with Yamaha wxc50 as digital pre-amp to Genelec 8340

audientid14, muokattu 1 Vuosi sitten.

Sound quality with Yamaha wxc50 as digital pre-amp to Genelec 8340

Youngling Viestejä: 1 Liittymispäivä: 24.1.2021 Viimeisimmät viestit

Im a happy owner of Genelec 8340 , Im using the digital output and volume control in Yamaha wxc50 connected to 8340.

Is there any gain in sound quality using the internal volume control in GLM instead of using the digital volume control in the Yamaha ?

lukester, muokattu 1 Vuosi sitten.

RE: Sound quality with Yamaha wxc50 as digital pre-amp to Genelec 8340

Jedi Master Viestejä: 296 Liittymispäivä: 22.4.2010 Viimeisimmät viestit

Yes, very much so.

The digital output has full quality only at 0db.
The Genelecs use a seperate GLM control signal so they can accept full volume signal and dim the amplifiers inside the speakers.
The tesult is stellar performance and no crackling volume poteniometers ever again.

masza, muokattu 1 Vuosi sitten.

RE: Sound quality with Yamaha wxc50 as digital pre-amp to Genelec 8340

Youngling Viestejä: 14 Liittymispäivä: 1.7.2014 Viimeisimmät viestit

In theory, yes. Can you hear it? It depends.

Yamaha WXC-50 has a good quality digital volume controller (at least stated by the manufacturer) so there definitely aren't going to be any potentiometer problems.

ragera, muokattu 1 Vuosi sitten.

RE: Sound quality with Yamaha wxc50 as digital pre-amp to Genelec 8340

Youngling Viestejä: 10 Liittymispäivä: 7.12.2016 Viimeisimmät viestit

I am in the same boat but plan to use Raspberry Pi3 and Topping D10s as USB SPIDF convertor. I will be mainly using Qobuz. since my Genelec monitors will not have permanent RJ45 cables connected, how can I use GLM volume control signal? At the moment, I am thinking to use IPAD volume buttons. And by the way, what is potentiometers issue? Sorry to ask this question. 

 

@audientid14: Are you using subwoofer? If yes, how do you split the signal between Genelec and subs?