GLM4 doesn't find any monitors

Genelec Community Forum has been archived

Thank you for all the years of Community discussions and activity!

The time has come for us to retire the community forums, but we will keep everything available for reading. There is a lot of valuable content written over the years, and you'll be able to access all of that. However, no new posts can be written, or old posts modified.

If you have questions, we recommend you use the Support function on the bottom right corner to contact our Customer Support directly.

Alternatively, if you wish to engage in a community discussion with other people, there are many active forums available. There is also an active, fan managed GENELEC COMMUNITY in Facebook, and many Genelec employees are active in the discussions there.

We are sorry for any possible inconvenience this may cause you, but we hope to hear from you through the other channels mentioned above.

Genelec Support

Keskusteluryhmät

shrike, muokattu 2 Vuodet sitten.

GLM4 doesn't find any monitors

Youngling Viestejä: 0 Liittymispäivä: 4.3.2021 Viimeisimmät viestit

I have BigSur 11.2.2, NetworkAdapter and GLM4.0. All cables are connected, all equipment turned on and lights on. But I don't see any monitors available. Yesterday I managed to see both my 8330 and do calibration - after some turning on/off to get 2nd monitor visible. Today, once and a while one monitor visible (whichever monitor was the first in daisy chain). But now, not even that.

Status indicator says: SL Offline (Ei monitoreja)

Am I missing some obvious? Is there particular sequence to turn on systems? Is there

shrike, muokattu 2 Vuodet sitten.

RE: GLM4 doesn't find any monitors

Youngling Viestejä: 0 Liittymispäivä: 4.3.2021 Viimeisimmät viestit

Found issue. One of the two RJ45 connectors in 8330 monitor was faulty. Rerouted daisy chain so that it is not needed.