Genelec Community Forum has been archived

Thank you for all the years of Community discussions and activity!

The time has come for us to retire the community forums, but we will keep everything available for reading. There is a lot of valuable content written over the years, and you'll be able to access all of that. However, no new posts can be written, or old posts modified.

If you have questions, we recommend you use the Support function on the bottom right corner to contact our Customer Support directly.

Alternatively, if you wish to engage in a community discussion with other people, there are many active forums available. There is also an active, fan managed GENELEC COMMUNITY in Facebook, and many Genelec employees are active in the discussions there.

We are sorry for any possible inconvenience this may cause you, but we hope to hear from you through the other channels mentioned above.

Genelec Support

Keskusteluryhmät

Using 7270A and 7370A subwoofers together (5.2)

fomo, muokattu 2 Vuodet sitten.

Using 7270A and 7370A subwoofers together (5.2)

Youngling Viestejä: 7 Liittymispäivä: 1.3.2021 Viimeisimmät viestit

I have the 7370A in my 5.1 system and would like to add a second subwoofer, the 7270A, for 5.2 but it appears that the 7270A only takes digital input. So if my 7370A is receiving all analog 5.1 signal, is it also converting the analog signal to digital so that I can send the digital signal to the 7270A?  Then GLM can connect to the entire 5.2 chain to manage room interaction?

pogo, muokattu 2 Vuodet sitten.

RE: Using 7270A and 7370A subwoofers together (5.2)

Youngling Viestejä: 12 Liittymispäivä: 15.3.2021 Viimeisimmät viestit

No. You'd either need to run your whole system with AES, or use an ADC.
I believe Genelec used to make one themselves, the AD9200a. But it seems like it's out of production now.