Genelec Community Forum has been archived

Thank you for all the years of Community discussions and activity!

The time has come for us to retire the community forums, but we will keep everything available for reading. There is a lot of valuable content written over the years, and you'll be able to access all of that. However, no new posts can be written, or old posts modified.

If you have questions, we recommend you use the Support function on the bottom right corner to contact our Customer Support directly.

Alternatively, if you wish to engage in a community discussion with other people, there are many active forums available. There is also an active, fan managed GENELEC COMMUNITY in Facebook, and many Genelec employees are active in the discussions there.

We are sorry for any possible inconvenience this may cause you, but we hope to hear from you through the other channels mentioned above.

Genelec Support

Keskusteluryhmät

GLM and Notch-Filters: How to achieve an increase around 62 Hz

verstaerker, muokattu 2 Vuodet sitten.

GLM and Notch-Filters: How to achieve an increase around 62 Hz

Youngling Viestejä: 2 Liittymispäivä: 30.4.2021 Viimeisimmät viestit

Hi

i just got my 8350s and trying to calibrate them to my room and taste .

While the Autocal does overall a good job it seems to ignore a deep hole at 62 Hz ... to compensate i'd like to increase at 62 Hz with 3- 3.5 dB. But i can't 

How can i achieve that? 

Liitteet:

pogo, muokattu 2 Vuodet sitten.

RE: GLM and Notch-Filters: How to achieve an increase around 62 Hz

Youngling Viestejä: 12 Liittymispäivä: 15.3.2021 Viimeisimmät viestit

GLM does not allow "upward" corrections, for it will impact dynamic range.

Besides, putting more energy into a null isn't going to magically fix it.

If you still want to, you're gonna have to resort to other options, such as Sonarworx or a MiniDSP.

janne-koo, muokattu 2 Vuodet sitten.

RE: GLM and Notch-Filters: How to achieve an increase around 62 Hz

Padawan Viestejä: 73 Liittymispäivä: 26.10.2015 Viimeisimmät viestit

A null is a black hole... Can't fixed it by throwing more Bels at it; Bad room cancellations can not be corrected with DSP. Move stuff around, improve the room otherwise - or live with it. A well-placed sub might work.

There are room/speaker placement calculators on the 'net, which may be of use. Here's just one random link to start with:
http://arqen.com/acoustics-101/speaker-placement-boundary-interference/