Genelec Community Forum has been archived

Thank you for all the years of Community discussions and activity!

The time has come for us to retire the community forums, but we will keep everything available for reading. There is a lot of valuable content written over the years, and you'll be able to access all of that. However, no new posts can be written, or old posts modified.

If you have questions, we recommend you use the Support function on the bottom right corner to contact our Customer Support directly.

Alternatively, if you wish to engage in a community discussion with other people, there are many active forums available. There is also an active, fan managed GENELEC COMMUNITY in Facebook, and many Genelec employees are active in the discussions there.

We are sorry for any possible inconvenience this may cause you, but we hope to hear from you through the other channels mentioned above.

Genelec Support

Keskusteluryhmät

GLM 4.0.2 calibration not working on macOS 10.15.7

raoulst, muokattu 1 Vuosi sitten.

GLM 4.0.2 calibration not working on macOS 10.15.7

Padawan Viestejä: 28 Liittymispäivä: 13.5.2016 Viimeisimmät viestit

Hi,

I recently updated to GLM 4.0.2 on macOS 10.15.7 to see if calibration with GLM 4 would now work.
Speakers are 8351B and 7360 subs.
The process went through, but in the end all calibrations end up flat.
Using GLM 3.2.0 on a separate installation of macOS 10.14 works fine.
I then open the GLM3 files on macOS 10.15.7 with GLM4 and can adjust them.
Anyone else experiencing this?
Also Acoustic Editor only shows corrections but not measurement results. 
Raoulst

verstaerker, muokattu 1 Vuosi sitten.

RE: GLM 4.0.2 calibration not working on macOS 10.15.7

Youngling Viestejä: 2 Liittymispäivä: 30.4.2021 Viimeisimmät viestit

i'm using GLM 4.02 on macOs 11.3 - it works all fine 

yz, muokattu 1 Vuosi sitten.

RE: GLM 4.0.2 calibration not working on macOS 10.15.7

Youngling Viestejä: 4 Liittymispäivä: 26.3.2021 Viimeisimmät viestit

Do you experience the issue about level control, described here? 

https://community.genelec.com/en/forum/-/message_boards/message/1767362#/

raoulst, muokattu 1 Vuosi sitten.

RE: GLM 4.0.2 calibration not working on macOS 10.15.7

Padawan Viestejä: 28 Liittymispäivä: 13.5.2016 Viimeisimmät viestit

Level control works fine.

raoulst, muokattu 1 Vuosi sitten.

RE: GLM 4.0.2 calibration not working on macOS 10.15.7 (Vastaus)

Padawan Viestejä: 28 Liittymispäivä: 13.5.2016 Viimeisimmät viestit

After contacting support, it turned out, that last year I had replaced my settings folder with a link to another folder to make synchronizing my GLM 3.2 measurements easier. After replacing that with a regular folder GLM 4.0.2 now works fine.