Genelec Community Forum has been archived

Thank you for all the years of Community discussions and activity!

The time has come for us to retire the community forums, but we will keep everything available for reading. There is a lot of valuable content written over the years, and you'll be able to access all of that. However, no new posts can be written, or old posts modified.

If you have questions, we recommend you use the Support function on the bottom right corner to contact our Customer Support directly.

Alternatively, if you wish to engage in a community discussion with other people, there are many active forums available. There is also an active, fan managed GENELEC COMMUNITY in Facebook, and many Genelec employees are active in the discussions there.

We are sorry for any possible inconvenience this may cause you, but we hope to hear from you through the other channels mentioned above.

Genelec Support

Keskusteluryhmät

GLM 4.1 level preset & USB controller issues...

mana, muokattu 11 Kuukautta sitten.

GLM 4.1 level preset & USB controller issues...

Youngling Viestejä: 6 Liittymispäivä: 3.5.2009 Viimeisimmät viestit

Updated to 4.1, few questions:

It seems that I can not release a level preset after I have activated it (previously those could be toggled on and off by clicking the preset)?

Also, previously, I could change the master level via the USB controller without it interfering with the chosen/active preset? Enabling (or disabling) the USB controller from Setup has no effect on this.

If I use the USB controller the volume jumps to whatever level the USB controller has and that can be hella annoying as you can not see what the level is because it tracks the level preset chosen. It would be great if it would function as it did in the previous versions, as in, have those presets as temporary overrides to the master level set with the USB controller or the master level fader (and have that level always visible).