Genelec Community Forum has been archived

Thank you for all the years of Community discussions and activity!

The time has come for us to retire the community forums, but we will keep everything available for reading. There is a lot of valuable content written over the years, and you'll be able to access all of that. However, no new posts can be written, or old posts modified.

If you have questions, we recommend you use the Support function on the bottom right corner to contact our Customer Support directly.

Alternatively, if you wish to engage in a community discussion with other people, there are many active forums available. There is also an active, fan managed GENELEC COMMUNITY in Facebook, and many Genelec employees are active in the discussions there.

We are sorry for any possible inconvenience this may cause you, but we hope to hear from you through the other channels mentioned above.

Genelec Support

Keskusteluryhmät

8330 Settings Store

paulom, muokattu 1 Vuosi sitten.

8330 Settings Store

Youngling Viestejä: 2 Liittymispäivä: 26.12.2020 Viimeisimmät viestit

Hi, just wanted to confirm if when using the 8330´s, the GLM Hub can be disconnected after calibration and the results from the calibration stored on the speakers DSP as you can do on a 8340. As the 8330´s don´t have a DIP switch for Store, I have this doubt. It´s for a small room, one setting will do, no need to keep switching setups etc. We have the GLM kit already and would like to use it for this simple calibration and return it to the room where is normally installed. Thanks for the info!