Genelec Community Forum has been archived

Thank you for all the years of Community discussions and activity!

The time has come for us to retire the community forums, but we will keep everything available for reading. There is a lot of valuable content written over the years, and you'll be able to access all of that. However, no new posts can be written, or old posts modified.

If you have questions, we recommend you use the Support function on the bottom right corner to contact our Customer Support directly.

Alternatively, if you wish to engage in a community discussion with other people, there are many active forums available. There is also an active, fan managed GENELEC COMMUNITY in Facebook, and many Genelec employees are active in the discussions there.

We are sorry for any possible inconvenience this may cause you, but we hope to hear from you through the other channels mentioned above.

Genelec Support

Keskusteluryhmät

How to connect?

seanrobert, muokattu 4 Kuukautta sitten.

How to connect?

Youngling Viestejä: 0 Liittymispäivä: 25.8.2021 Viimeisimmät viestit

Hi! How to connect 2 genelec 8020a and a 7050b sub to the iMac? What should I do? Can I use the 3.5 plug or is it troublesome with balanced XLR to unbalanced 3.5?

lukester, muokattu 4 Kuukautta sitten.

RE: How to connect?

Jedi Master Viestejä: 296 Liittymispäivä: 22.4.2010 Viimeisimmät viestit

you can use the 3.5 plug, unbalanced, no problem.
The soundcard in your imac isn't very good, it would be good if you spent at least 150 bucks on a proper sound card with a volume control knob.