Genelec Community Forum has been archived

Thank you for all the years of Community discussions and activity!

The time has come for us to retire the community forums, but we will keep everything available for reading. There is a lot of valuable content written over the years, and you'll be able to access all of that. However, no new posts can be written, or old posts modified.

If you have questions, we recommend you use the Support function on the bottom right corner to contact our Customer Support directly.

Alternatively, if you wish to engage in a community discussion with other people, there are many active forums available. There is also an active, fan managed GENELEC COMMUNITY in Facebook, and many Genelec employees are active in the discussions there.

We are sorry for any possible inconvenience this may cause you, but we hope to hear from you through the other channels mentioned above.

Genelec Support

Keskusteluryhmät

Just joined Genelec SAM family with 8330a and did very first calibration!

futuresynthesizer, muokattu 8 Kuukautta sitten.

Just joined Genelec SAM family with 8330a and did very first calibration!

Youngling Viestejä: 0 Liittymispäivä: 3.9.2021 Viimeisimmät viestit

I have been craving for new Genelec Smart monitors for very long time and finally invested in these beautiful 8330a along with GLM kit.

I was impressed with calibration and I do actually need some days of monitoring to get used to these babies! :)

 

One question here, so after calibration with GLM 4.1, do I simply disconnect the device if I saved the preset to the loudspeakers as preset?

Also how do you guys turn off? do you turn off and turn on with GLM app or by simply manually?

 

Thanks in advance!

 

 

Oh! also I see my music production room, I do seem to have critical dip around 80~100Hz.. but the adjustment does not seem to do dramatic boost... what do you guys do if this was your case? shall I boost manually or... shall I just leave it? 

 

My room is fairly not too big. 4.3m x 3.6m x 2.5m high. Very lightly treated with side panels. No bass traps.

 

Just curious about how you all deal with calibration and how extremely you guys go for.

glm
lukester, muokattu 8 Kuukautta sitten.

RE: Just joined Genelec SAM family with 8330a and did very first calibratio

Jedi Master Viestejä: 296 Liittymispäivä: 22.4.2010 Viimeisimmät viestit

Q1: yes, you save the calibration to the speakers. After that you need to keep the speakers connected to the GLM adapter, connection to the computer is optional.
I let them turn off automatically with the ISS power saving feature, mine turn off half an hour after the computer shuts down.

Q2: Genelec doesn't boost frequencies, only cuts them. That's a more conservative stance than other room correction suits, but there's good arguments for that.
You can try a bit of boost in software, see if it works for you, but know that this will loose headroom on the speakers.