Genelec Community Forum has been archived

Thank you for all the years of Community discussions and activity!

The time has come for us to retire the community forums, but we will keep everything available for reading. There is a lot of valuable content written over the years, and you'll be able to access all of that. However, no new posts can be written, or old posts modified.

If you have questions, we recommend you use the Support function on the bottom right corner to contact our Customer Support directly.

Alternatively, if you wish to engage in a community discussion with other people, there are many active forums available. There is also an active, fan managed GENELEC COMMUNITY in Facebook, and many Genelec employees are active in the discussions there.

We are sorry for any possible inconvenience this may cause you, but we hope to hear from you through the other channels mentioned above.

Genelec Support

Keskusteluryhmät

How would you deal with dip issue around 80~120hz!?

futuresynthesizer, muokattu 4 Kuukautta sitten.

How would you deal with dip issue around 80~120hz!?

Youngling Viestejä: 0 Liittymispäivä: 3.9.2021 Viimeisimmät viestit

Hello, I have done very first calibration with my 8330a pair with GLM 4.1 kit. I absolutely love how it improved the clarity (Checked with on and off switch)

 

One question here, I understand SAM system does not encourage to do additive EQing. My room is fairly small. 4.3m x 3.6m x 2.6m high.

I have slight -3dB dips around 80~120Hz which is very important area for mixing bass and kick.

 

How would you get this improved in the future if it was your case?

Any recommendation would be grateful. Shall I go for extra sub...? or room is too small to have a sub...?

 

Atm, I have 8330a without sub.

Other than the dips I love how it sounds.

Also really impressed how it still bangs low end without sub.

costakis, muokattu 4 Kuukautta sitten.

RE: How would you deal with dip issue around 80~120hz!?

Padawan Viestejä: 76 Liittymispäivä: 13.2.2019 Viimeisimmät viestit

Dips are depending on the room dimensions & speakers placement. One or two subs will give you the chance to correct (in some degree) your problem. The reasons are:

- You can place the sub(s) and monitors in ideal positions. Check here: https://www.genelec.com/monitor-placement Subs perform better close to walls, while the monitors require some distance from the walls (and other things :) )

- The 8330s will have less "load" with the addition of the sub(s)