Genelec Community Forum has been archived

Thank you for all the years of Community discussions and activity!

The time has come for us to retire the community forums, but we will keep everything available for reading. There is a lot of valuable content written over the years, and you'll be able to access all of that. However, no new posts can be written, or old posts modified.

If you have questions, we recommend you use the Support function on the bottom right corner to contact our Customer Support directly.

Alternatively, if you wish to engage in a community discussion with other people, there are many active forums available. There is also an active, fan managed GENELEC COMMUNITY in Facebook, and many Genelec employees are active in the discussions there.

We are sorry for any possible inconvenience this may cause you, but we hope to hear from you through the other channels mentioned above.

Genelec Support

Keskusteluryhmät

do you need to keep running the GLM software to enjoy the benefits?

oriax12, muokattu 2 Vuodet sitten.

do you need to keep running the GLM software to enjoy the benefits?

Youngling Viestejä: 0 Liittymispäivä: 2.10.2021 Viimeisimmät viestit

Hi,

Do you need to keep running the glm software in the background to reap the benefits from the calibration?

second question, I see different readings on frequency responses for the left and right speakers (running 8330A), is this normal or should reposition and recalibrate?

Thanks!

lukester, muokattu 2 Vuodet sitten.

RE: do you need to keep running the GLM software to enjoy the benefits?

Jedi Master Viestejä: 296 Liittymispäivä: 22.4.2010 Viimeisimmät viestit

Yes, you can store calibration to the speakers,
In theGLM software under Group -> Save Group Settings

If you supply your GLM adapter with 5V from a USB phone charger, you won't need the computer or software running anymore.

Slightly different response from left to right speakers are totally normal.
In your case bass respons is quite different left to right.
I think it should be allright, does the system sound symmetrical to you?
Your time of flight correction looks good, big values would indicate that the setup isn't symmetrical enough.