Genelec Community Forum has been archived

Thank you for all the years of Community discussions and activity!

The time has come for us to retire the community forums, but we will keep everything available for reading. There is a lot of valuable content written over the years, and you'll be able to access all of that. However, no new posts can be written, or old posts modified.

If you have questions, we recommend you use the Support function on the bottom right corner to contact our Customer Support directly.

Alternatively, if you wish to engage in a community discussion with other people, there are many active forums available. There is also an active, fan managed GENELEC COMMUNITY in Facebook, and many Genelec employees are active in the discussions there.

We are sorry for any possible inconvenience this may cause you, but we hope to hear from you through the other channels mentioned above.

Genelec Support


WXC-50, pair of G threes and Klipsch R-120SW together

hamppi90, muokattu 1 Vuosi sitten.

WXC-50, pair of G threes and Klipsch R-120SW together

Youngling Viestejä: 1 Liittymispäivä: 9.12.2021 Viimeisimmät viestit

How would you get the most out of two G threes speakers and a Klipsch R-12SW subwoofer? If I understood correctly, the crossover settings are quite limited in the Yamaha WXC-50. What do I still need (or need to change), to pass the high frequencies for the G threes and the low frequencies for the sub? In addition, a sub equalizer such as Antimode Cinema or similar is probably needed?

Thank you!