Genelec Community Forum has been archived

Thank you for all the years of Community discussions and activity!

The time has come for us to retire the community forums, but we will keep everything available for reading. There is a lot of valuable content written over the years, and you'll be able to access all of that. However, no new posts can be written, or old posts modified.

If you have questions, we recommend you use the Support function on the bottom right corner to contact our Customer Support directly.

Alternatively, if you wish to engage in a community discussion with other people, there are many active forums available. There is also an active, fan managed GENELEC COMMUNITY in Facebook, and many Genelec employees are active in the discussions there.

We are sorry for any possible inconvenience this may cause you, but we hope to hear from you through the other channels mentioned above.

Genelec Support

Keskusteluryhmät

mount 8260

maob, muokattu 11 Kuukautta sitten.

mount 8260

Padawan Viestejä: 30 Liittymispäivä: 27.1.2016 Viimeisimmät viestit

good afternoon.
I want to hang the monitor on a bracket to the wall. I want to fasten the bracket to the back wall of the monitor. At the back of the monitor there are several bolt holes: 6 pieces M6 or 4 pieces M4 (at a distance of 100x100).
Tell me, please, are four M4 holes (100x100) sufficient to attach the monitor to the bracket? Can they be used to mount the monitor on the bracket? 
Why is the number of holes for M4 bolts less than for powerful M6 bolts?