Genelec Community Forum has been archived

Thank you for all the years of Community discussions and activity!

The time has come for us to retire the community forums, but we will keep everything available for reading. There is a lot of valuable content written over the years, and you'll be able to access all of that. However, no new posts can be written, or old posts modified.

If you have questions, we recommend you use the Support function on the bottom right corner to contact our Customer Support directly.

Alternatively, if you wish to engage in a community discussion with other people, there are many active forums available. There is also an active, fan managed GENELEC COMMUNITY in Facebook, and many Genelec employees are active in the discussions there.

We are sorry for any possible inconvenience this may cause you, but we hope to hear from you through the other channels mentioned above.

Genelec Support

Keskusteluryhmät

Question about genelec 8020a

yoavu, muokattu 5 Vuodet sitten.

Question about genelec 8020a

Youngling Viestejä: 2 Liittymispäivä: 25.4.2017 Viimeisimmät viestit
Hi, i have genelec 8020a and i was woundering if i move clockwise until the end of the volume knob would i be at +4 pro db ? Or -10dbu ?

Thanks for your answers it really important to me to know because my soundcard is on +4
markus-kahelin, muokattu 5 Vuodet sitten.

Re: Question about genelec 8020a

Jedi Knight Viestejä: 109 Liittymispäivä: 16.3.2010 Viimeisimmät viestit
Hi!

The input is professional balanced line level, so +4. The sensitivity of that model is specified:

Input level for 100dB output at 1m with volume control at maximum is -6dBu
yoavu, muokattu 5 Vuodet sitten.

Re: Question about genelec 8020a

Youngling Viestejä: 2 Liittymispäivä: 25.4.2017 Viimeisimmät viestit
Hi, First of all let me say thanks for your answer,

Ok so if i understand you it will be ok if i move the volume knob on the monitors both to the middle and not full clockwise ? because i feel it too strong, but i still want to be on the professional gain of +4db for my mixes and mastering ?

thank you
markus-kahelin, muokattu 5 Vuodet sitten.

Re: Question about genelec 8020a

Jedi Knight Viestejä: 109 Liittymispäivä: 16.3.2010 Viimeisimmät viestit
Volume control is there to be used, yes you can turn them!