Genelec Community Forum has been archived

Thank you for all the years of Community discussions and activity!

The time has come for us to retire the community forums, but we will keep everything available for reading. There is a lot of valuable content written over the years, and you'll be able to access all of that. However, no new posts can be written, or old posts modified.

If you have questions, we recommend you use the Support function on the bottom right corner to contact our Customer Support directly.

Alternatively, if you wish to engage in a community discussion with other people, there are many active forums available. There is also an active, fan managed GENELEC COMMUNITY in Facebook, and many Genelec employees are active in the discussions there.

We are sorry for any possible inconvenience this may cause you, but we hope to hear from you through the other channels mentioned above.

Genelec Support


K&M 23320 with Genelec 8040 ?

zutko, muokattu 5 Vuodet sitten.

K&M 23320 with Genelec 8040 ?

Youngling Viestejä: 4 Liittymispäivä: 4.12.2015 Viimeisimmät viestit
I know Genelec recomends 23310 with special plate for 8040, but the upgrade ( 23320 ) is almost the same stand apart from that 23320 can be adjustable in height and has a bigger plate. My question is, will it work ? Is it recommendable ?
ilkka-rissanen, muokattu 5 Vuodet sitten.

Re: K&M 23320 with Genelec 8040 ?

Yoda Viestejä: 2564 Liittymispäivä: 23.3.2009 Viimeisimmät viestit
You can use either stand, they are almost identical.