Genelec Community Forum has been archived

Thank you for all the years of Community discussions and activity!

The time has come for us to retire the community forums, but we will keep everything available for reading. There is a lot of valuable content written over the years, and you'll be able to access all of that. However, no new posts can be written, or old posts modified.

If you have questions, we recommend you use the Support function on the bottom right corner to contact our Customer Support directly.

Alternatively, if you wish to engage in a community discussion with other people, there are many active forums available. There is also an active, fan managed GENELEC COMMUNITY in Facebook, and many Genelec employees are active in the discussions there.

We are sorry for any possible inconvenience this may cause you, but we hope to hear from you through the other channels mentioned above.

Genelec Support

Keskusteluryhmät

8351: Power Cord

bluebird, muokattu 5 Vuodet sitten.

8351: Power Cord

Youngling Viestejä: 1 Liittymispäivä: 28.2.2017 Viimeisimmät viestit
Hi,

I need a longer power cord (about 2,5m) for my 8351s, because the ones that came with it are a little bit to short.

They are H05-F 3x0,75mm2. Should I better get 3x1,5mm2? A friend told me I should take 3x2,5mm2, because of better performance.

What do you as the manufacturer recommend? Is there any sense in taking such a huge diameter?
ilkka-rissanen, muokattu 5 Vuodet sitten.

Re: 8351: Power Cord

Yoda Viestejä: 2564 Liittymispäivä: 23.3.2009 Viimeisimmät viestit
A standard 3x0,75mm^2 power cord will be sufficient for 2,5m length. Larger wire diameters are only required for much longer cable lengths, for example 20 meters or more.