Genelec Community Forum has been archived

Thank you for all the years of Community discussions and activity!

The time has come for us to retire the community forums, but we will keep everything available for reading. There is a lot of valuable content written over the years, and you'll be able to access all of that. However, no new posts can be written, or old posts modified.

If you have questions, we recommend you use the Support function on the bottom right corner to contact our Customer Support directly.

Alternatively, if you wish to engage in a community discussion with other people, there are many active forums available. There is also an active, fan managed GENELEC COMMUNITY in Facebook, and many Genelec employees are active in the discussions there.

We are sorry for any possible inconvenience this may cause you, but we hope to hear from you through the other channels mentioned above.

Genelec Support

Keskusteluryhmät

GLM hangs.

richardwin, muokattu 5 Vuodet sitten.

GLM hangs.

Youngling Viestejä: 12 Liittymispäivä: 4.3.2017 Viimeisimmät viestit
GLM hangs on calibration on one pair. All dip switches set to off. 4 8351, 1 7360 sub.

The speakers are in two different rooms. Got autocalibrate to work on one room, not the other.
win7 x64 GLM 2.1.0
ilkka-rissanen, muokattu 5 Vuodet sitten.

Re: GLM hangs.

Yoda Viestejä: 2564 Liittymispäivä: 23.3.2009 Viimeisimmät viestit
Hi,

Could you please download and install the net GLM 2.2.0 version and update all monitors and network adapter firmware?

viewtopic.php?f=3&t=2733

Is the whole system networked together or do you have two separate networks? If the former, how long is the total network? Can you send your GLM setup file (Help | Export setup to desktop) to SAM@genelec.com?
richardwin, muokattu 5 Vuodet sitten.

Re: GLM hangs.

Youngling Viestejä: 12 Liittymispäivä: 4.3.2017 Viimeisimmät viestit
"GLMv2 2.2.0 build 91 installation packages for testing have been removed!"

Single network. Speaker set 1 is 10 meters from speaker set 2.
ilkka-rissanen, muokattu 5 Vuodet sitten.

Re: GLM hangs.

Yoda Viestejä: 2564 Liittymispäivä: 23.3.2009 Viimeisimmät viestit
Hi,

We just updated a new version there. Can you please try to download again? Thanks!
richardwin, muokattu 5 Vuodet sitten.

Re: GLM hangs.

Youngling Viestejä: 12 Liittymispäivä: 4.3.2017 Viimeisimmät viestit
All 8351 and 7360 updated firmware fine. GLM adapter update Hung. Firmware version: 1.0.7.1879 After unplug replug USB on GLM, firmware update was successful.

Autocal now hangs differently. After single channel sine sweep, just sits there, with speaker blinking green.

Tried deleting all profiles, (and it would remember an old profile name using "last_used" txt, so deleted that too)

Same hang.

After power cycle speakers and GLM controller, can use speakers without calibration.
ilkka-rissanen, muokattu 5 Vuodet sitten.

Re: GLM hangs.

Yoda Viestejä: 2564 Liittymispäivä: 23.3.2009 Viimeisimmät viestit
Hi,

Can you please send us your GLM setup? "Help | Export setup to desktop"

SAM (at) genelec.com
richardwin, muokattu 5 Vuodet sitten.

Re: GLM hangs.

Youngling Viestejä: 12 Liittymispäivä: 4.3.2017 Viimeisimmät viestit
I did mar 18
luisaestrada, muokattu 5 Vuodet sitten.

Re: GLM hangs.

Youngling Viestejä: 2 Liittymispäivä: 21.3.2017 Viimeisimmät viestit
are you doing glm on the main data set or transformed one with built corpus?
richardwin, muokattu 5 Vuodet sitten.

Re: GLM hangs.

Youngling Viestejä: 12 Liittymispäivä: 4.3.2017 Viimeisimmät viestit
You've 100 percent lost me :)
ilkka-rissanen, muokattu 5 Vuodet sitten.

Re: GLM hangs.

Yoda Viestejä: 2564 Liittymispäivä: 23.3.2009 Viimeisimmät viestit
I did mar 18

Thank you. We will investigate your setup files and report back as soon as possible.